Skip to content

Creality K1 SE

No owners yet. Here's everything else.

Creality K1 SE

0 of 5 owners · 5 more and the score goes live.

Own one? Tap your score:
No current price Sold out

Owner reviews 0 Rate it (10 seconds)

Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.

No owner reviews yet. If you own a K1 SE, yours will be the first, and it starts this printer's ranking.

Owner wall

Own one? Add yours

No verified owners yet. Post a photo of yours with your code and be the first on the wall.

Price history

Official US store, checked weekly

No price history yet.

Known issues 2, 2 serious

Report an issue

From brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.

  • High Leveling sensor errors and a badly tilted bed mesh Last reported Feb 2026

    Owners report leveling sensor errors such as CL2537 and 2524 that stop Z homing, and in one case a bed mesh off by several millimeters that replacement strain gauges and a mainboard did not fix. Some errors showed up after a month or more of use.

    What fixes it: One owner found debris on the sensor under the build plate, so check there first. Another brought a tilted bed to about 0.2 mm by shimming the low side with washers. Reseating connectors did not help one owner, and replacement strain gauges and a mainboard did not fix another, so a warranty claim may be needed.

    From public reports: forum.creality.com, forum.creality.com, forum.creality.com · Confirm or add a fix

  • High Key 2092 internal error leaves the printer unusable Last reported Feb 2026

    Some owners get a red Key 2092 internal error at every boot. One got it after a hotend failure left the temperature sensor not working, another after the printer sat idle following a print. Neither thread reached a fix.

    What fixes it: No confirmed fix. A forum regular suggested a warranty claim and keeping a spare hotend.

    From public reports: forum.creality.com, forum.creality.com · Confirm or add a fix

Specs

An open-frame, cost-cut K1 that kept the CoreXY speed but dropped the enclosure and camera. Widely owned as a cheap fast printer and now effectively replaced by the K2 SE.

220 × 220 × 250 mmbuild volume
CoreXY, open frameformat
300 °Cmax nozzle
100 °Cmax bed
None (open frame)chamber
600 mm/smax speed
1toolheads
Creality CFS-Cmulticolor add-on
August 2024released