Skip to content
Medium Open Extrusion & Hotend

Heat creep clogs on long or hot prints

The Neptune 4 Pro feeds filament through a PTFE tube into the heat break, and Printer Hub collects owner reports of heat creep clogs late in long prints, often 70 to 90 percent of the way through. A stalled heat-break fan, back-to-back prints and sustained printing above about 250 °C make it worse. The nozzle is also a custom Elegoo design, so standard replacement nozzles do not fit. Elegoo has a nozzle clogging page for the Neptune series.

What fixes it

Confirm the heat-break fan spins whenever the nozzle is hot, let the heat break cool between back-to-back prints, reseat or replace the PTFE tube, re-torque the nozzle hot, and use only nozzles made for the Neptune 4 and 4 Pro. For sustained printing above about 250 °C, Printer Hub suggests an all-metal hotend.

Log in to confirm this happens to you 0 owners confirmed

Workarounds (0)

No workarounds posted yet.

Comments (0)

No comments yet.

Log in to comment