Skip to content
Medium Open Other

Layers shift or twist at one height with chamber heater on

Tall ABS, ASA and ASA-CF prints develop a band of XY shift or twist roughly 30 mm tall, starting somewhere around 230 to 275 mm. Owners only see it with the active chamber heater running, not with PLA. Bambu support attributed it to the chamber heater warming one bed corner, but offered only a G-code workaround.

What fixes it

Turn off chamber heating at the affected height with custom G-code (M141 S0 when layer_z > 230). Results are mixed.

Log in to confirm this happens to you 0 owners confirmed

Workarounds (0)

No workarounds posted yet.

Comments (0)

No comments yet.

Log in to comment