Bambu Lab H2S known issues
What owners run into, most important first. Issues marked "from public reports" come from brand advisories, owner forums and reviews, linked on each one.
-
Medium Gaps on first and top layers with stock profiles
H2-series owners, including H2S users, report gaps between lines on first and top layers and between infill and walls using default settings. Bambu developers acknowledged the issue on GitHub, said differences between printers make it complex, and promised a slicer mitigation before a full fix.
What fixes it: Owners run manual flow calibration, raise first-layer flow slightly, increase infill/wall overlap, and use monotonic line settings. Results are mixed.
From public reports: github.com, forum.bambulab.com, forum.bambulab.com · Confirm or add a fix
-
Medium Layers shift or twist at one height with chamber heater on
Tall ABS, ASA and ASA-CF prints develop a band of XY shift or twist roughly 30 mm tall, starting somewhere around 230 to 275 mm. Owners only see it with the active chamber heater running, not with PLA. Bambu support attributed it to the chamber heater warming one bed corner, but offered only a G-code workaround.
What fixes it: Turn off chamber heating at the affected height with custom G-code (M141 S0 when layer_z > 230). Results are mixed.
From public reports: forum.bambulab.com · Confirm or add a fix