Skip to content

Newer version available: the Creality SPARKX i8.

Medium Open Bed Adhesion & Leveling

Uneven bed mesh causes first-layer and adhesion failures

Owners report bed meshes with roughly 0.7 to 1.0 mm of variation, tilted or warped beds, and parts detaching or first layers not sticking even on default settings.

What fixes it

Owners check the mesh in Fluidd, level the four corners with the bed screws, check X-axis and X-to-Z screws for looseness, and in one case shim under the plate with foil. One owner got the mesh down to about 0.3 mm this way; another could not get below 0.7 mm. It can take hours.

Log in to confirm this happens to you 0 owners confirmed

Workarounds (0)

No workarounds posted yet.

Comments (0)

No comments yet.

Log in to comment