Skip to content
Medium Open Extrusion & Hotend

CFS cutter jam error TC2841 blocks printing

With the CFS fitted, the printer stops with 'cutter issue, cutter might be jammed' and will not continue. One owner fixed it by fully seating the extruder and another by switching filament; one found a short on the cutter sensor circuit. Creality support has sent at least one replacement cutter.

What fixes it

Pull the extruder and slide the cutter by hand to find binding, fully reseat the extruder, then run Self Check with cutter calibration, which worked for one owner. Switching filament brand fixed it for another. Loosening the XY belts slightly has been suggested, with no results reported.

Log in to confirm this happens to you 0 owners confirmed

Workarounds (0)

No workarounds posted yet.

Comments (0)

No comments yet.

Log in to comment