Skip to content
Low Open Extrusion & Hotend

Heat creep clogs with low-temp filament in a closed chamber

Bambu's wiki lists enclosure heat as the most common cause of clogs on the X1 Carbon. PLA is fine on the Cool Plate with the door closed, but warmer beds, warm rooms, PVA or TPU can soften filament above the hotend and jam it.

What fixes it

Open or remove the door and top cover for PLA, PVA and TPU when using warmer plates, per Bambu's guidance.

Log in to confirm this happens to you 0 owners confirmed

Workarounds (0)

No workarounds posted yet.

Comments (0)

No comments yet.

Log in to comment