Extrusion stops mid-print with clicking or thin lines
Prints start fine, then the extruder clicks or the line thins out and extrusion stops while the printer keeps moving, with no error shown. One owner hit it within two weeks and two spools of PLA, and swapping filament or the nozzle did not cure it for the owners who tried.
What fixes it
A forum regular suggested backing off the extruder tension screw in quarter turns, which gave mixed results. Also check that the hotend fan spins (a dead fan causes heat creep) and keep slicer retraction short (about 0.8 to 1.2 mm). Neither thread reached a confirmed fix.
Log in to confirm this happens to you
0 owners confirmed