Creality K2 Pro known issues
What owners run into, most important first. Issues marked "from public reports" come from brand advisories, owner forums and reviews, linked on each one.
-
Critical Nozzle strikes the plate during leveling (strain sensor errors)
One owner reports the nozzle hitting the PEI sheet during pre-print leveling with a 2761 error, repeating after recalibration. Another had a strain sensor error about two months after purchase, with the build plate damaged; Creality sent a replacement strain sensor, hotend and build plate.
What fixes it: Running the self-test and recalibrating did not fix it for the first owner. Replacing the strain sensor, hotend and build plate fixed it for the second owner. Contact support with photos and order details.
From public reports: forum.creality.com, forum.creality.com · Confirm or add a fix
-
High Print head cable faults cause motion and sensor errors
Owners see a mix of changing errors (such as CM2789, TE2762 and XS2060) and the head knocking into the walls. Two owners fixed it by replacing the print head cable that runs through the drag chain; the error codes are what owners saw, not codes proven to be cable faults.
What fixes it: Replace the print head cable (about a 30 minute job). One owner recommends keeping a spare.
From public reports: forum.creality.com, forum.creality.com · Confirm or add a fix
-
High Extruder and filament break sensor failures
One owner's extruder motor stopped turning after about a week. Another owner with about 500 hours replaced the extruder, filament break detector and tubes.
What fixes it: Creality sent the first owner a replacement extruder motor, which fixed it. One owner says live chat got a faster response than email.
From public reports: forum.creality.com, forum.creality.com · Confirm or add a fix
-
High Printing stops with no-extrusion errors (FO0528/FO058)
Prints stop partway with a printing-without-extruding error (FO0528), with both the CFS and the external spool and across filament brands. Owners suspect firmware or software, and one poster recommends reverting to an older firmware, though no cause is confirmed.
What fixes it: Cleaning the nozzle and recalibrating did not fix it for one owner. Lowering max volumetric speed from 23 to 20 helped some prints but not all. Others suggest dry filament and current Creality Print profiles. No confirmed fix.
From public reports: forum.creality.com, forum.creality.com · Confirm or add a fix
-
High CFS feed and retract errors at filament change
Filament fails to leave the extruder or return to the CFS at a color change or at the end of a print, giving errors such as FR2865, FR2849 or FO2837. One owner found a melted blob on the cut tip larger than the tube.
What fixes it: Owners suggest clearing broken filament fragments from the extruder, checking that the cutter blade is not upside down, fitting a printed cutter spacer, and drying filament. None of these was confirmed to work in the threads, and no official fix has been posted.
From public reports: forum.creality.com, forum.creality.com · Confirm or add a fix
-
Medium Quality and leveling problems after firmware 1.1.7.0
After updating to 1.1.7.0 (Sept 2026), K2 and K2 Pro owners reported stringing, poor walls and seams, and one reported auto leveling driving the nozzle into the bed. One poster later said they may have blamed the firmware too quickly, so treat this as unconfirmed.
What fixes it: One owner rolled back firmware and advised waiting for the next release. USB downgrade did not work for another owner.
From public reports: forum.creality.com · Confirm or add a fix