Original Prusa MK4S known issues
What owners run into, most important first. Issues marked "from public reports" come from brand advisories, owner forums and reviews, linked on each one.
-
Medium False 'Filament stuck' errors since firmware 6.4.0
Since 6.4.0 added auto-retract, several owners get a Filament stuck error right after the purge line or mid-print even though filament feeds fine. Owners put the frequency anywhere from 1 in 5 prints to about 8 in 10. It was still reported on 6.5.3, and an owner filed a GitHub bug report.
What fixes it: Owners report reverting to 6.2.6 as the most reliable workaround. Unload and reload, or reset and restart the print, clears it each time. Sensor recalibration and disabling auto-retract did not help.
From public reports: forum.prusa3d.com, github.com · Confirm or add a fix
-
Medium Extrusion stops mid-print with clogs or stuck filament
Owners report prints pausing for stuck filament repeatedly, extruder clicking, and PLA or PETG clogging after a few layers. One owner replaced three nozzles and the hotend without a fix. Several noticed it after fitting the high-flow nozzle.
What fixes it: Owners report fixes from a new nozzle, correct idler tension and a nozzle 5 to 10 C hotter; some stopped false pauses by disabling stuck-filament detection, and in one case Prusa support replaced the extruder motor.
From public reports: forum.prusa3d.com, forum.prusa3d.com, forum.prusa3d.com · Confirm or add a fix