Prusa CORE One+ known issues
What owners run into, most important first. Issues marked "from public reports" come from brand advisories, owner forums and reviews, linked on each one.
-
Medium Random reboots linked to static discharge
CORE One family printers, including a factory-built CORE One+, reboot or power off mid-print or when the bed or sheet is touched. Owners blame static build-up because the motors and bed are not well grounded to the powder-coated frame. A Prusa staff member passed the reports to the product team in February 2026.
What fixes it: Ground the XY stepper motors (wire or star washers on the mounting screws) and bond the bed to the frame. This stopped reboots for some owners but not all.
From public reports: forum.prusa3d.com, forum.prusa3d.com, forum.prusa3d.com · Confirm or add a fix
-
Medium XY position loss and homing check failures on new units
A factory-assembled CORE One+ lost XY position after fast moves, and a kit owner had the gantry out of square and failed homing checks after belt tuning. Community advice centers on a square gantry and evenly tensioned belts, and one forum member says Prusa has changed its alignment and tensioning instructions repeatedly.
What fixes it: Community members suggest squaring the gantry, tensioning both belts evenly with the built-in stroboscope wizard rather than a sound app, and checking the motor pulley grub screws. Neither owner reported a confirmed fix.
From public reports: forum.prusa3d.com, forum.prusa3d.com, forum.prusa3d.com · Confirm or add a fix