Skip to content

Anycubic Kobra 3 V2

No owners yet. Here's everything else.

Anycubic Kobra 3 V2

0 of 5 owners · 5 more and the score goes live.

Own one? Tap your score:
Discontinued

No longer sold new. Reviews and known issues still apply.

Owner reviews 0 Rate it (10 seconds)

Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.

No owner reviews yet. If you own a Kobra 3 V2, yours will be the first, and it starts this printer's ranking.

Owner wall

Own one? Add yours

No verified owners yet. Post a photo of yours with your code and be the first on the wall.

Price history

Official US store, checked weekly

No price history yet.

Known issues 3

Report an issue

From brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.

  • Medium Large prints lift off the weak magnetic bed Last reported Oct 2026

    The magnetic spring steel sheet does not hold large parts firmly; as big flat parts cool, the plate corners lift. A long-term tester also had prints flung off the plate and failed starts from adhesion errors.

    What fixes it: Notebookcheck's reviewer clamped the plate corners, but warns clamps can damage the thin coating over the bed heater, so it is risky.

    From public reports: notebookcheck.net, creativebloq.com · Confirm or add a fix

  • Medium Purge waste dragged or flung onto the print Last reported Oct 2026

    During color changes the purge chute and wiper do not always clear the nozzle: the wiper sits too far away so the head drags residue onto the model, and the chute divider can stick and fling waste onto the bed. Seen in two reviews of the V2 Combo.

    What fixes it: Notebookcheck's reviewer fixed the dragging by adding a rubber strip to the wiper so it reaches the nozzle.

    From public reports: notebookcheck.net, creativebloq.com · Confirm or add a fix

  • Medium ACE Pro false tangle errors, misfeeds and clogs Last reported Dec 2025

    The ACE Pro multicolor unit caused many failed prints in testing: false 'Tangled Filament' pauses, misfeeds during loading, the wrong color being fed, and clogs that left poorly fused layers. Each pause or error triggers extra purging that wastes filament. Reported by two reviewers in 2025.

    What fixes it: No fix reported.

    From public reports: creativebloq.com, tomshardware.com · Confirm or add a fix

Older or fixed issues (1)
  • Low AI spaghetti detection pauses good prints Fixed Sep 2025

    At launch the camera's failure detection was far too sensitive, pausing prints that were fine. Anycubic later added a sensitivity adjustment in a firmware update.

    What fixes it: Update the firmware and adjust the detection sensitivity, or turn detection off.

    From public reports: tomshardware.com, creativebloq.com · Confirm or add a fix

Specs

A 2025 update of the Kobra 3 bed slinger that added a built-in camera, the Kobra S1 style nozzle and a slightly larger bed. Used units suit budget buyers who want a mid-size multicolor-capable machine, though it has been replaced by the Kobra 4.

255 × 255 × 260 mmbuild volume
Bed slinger, open frameformat
300 °Cmax nozzle
110 °Cmax bed
None (open frame)chamber
600 mm/smax speed
1toolheads
Anycubic ACE 2 Promulticolor add-on
Kobra 3 Kobra 3 V2replaces
May 2025released
What the press said · 8.0 from 1 press outlet · Read them

What reviewers say 8.0 from 1

How scores work
  • 8.0 Creative BloqAfter four months of use, single-color print quality is good and the price is low, but the ACE … 4/5 · Dec 2025

    After four months of use, single-color print quality is good and the price is low, but the ACE Pro multicolor unit is unreliable enough that it suits budget beginners more than businesses.

    • Good single-color print quality
    • Easy setup
    • Very affordable
    • ACE Pro clogs, jams and tangles
    • Limited app remote printing
    • False spaghetti detection alarms

    Read the full review on Creative Bloq · by Beth Nicholls