Skip to content

Anycubic Kobra 3

Not enough owners for a score yet. Here's what they say so far. Wait for a sale.

Anycubic Kobra 3

1 of 5 owners · 4 more and the score goes live.

Own one? Tap your score:
$349 Sold out
Buy at Anycubic

Paid link. We may earn a commission at no extra cost to you. How this works

Price checked Nov 7 on the official US store.

Owner reviews 1 Rate it (10 seconds)

Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.

Not enough owner reviews for an overall owner rating yet: 1 of 5. Every rating is shown below as it comes in. Own one? Add yours.

O
owner-75918Earned Spools November 9, 2026 (Edited)
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ 10
Recommends this

Great Entry Level Machine - Just getting old, like all tech does

Owned 1 to 2 years · Biggest problem: None. I wish the nozzle could be swapped quickly, but the full hotend is only $15 so it's not terrible to just replace the full hotend... it would bug me more if this was for home use, but it only take 1 dragon sale to pay for the swap

What I liked:

Cheap machine that comes with a filament dryer if you buy the combo. Great entry level printer that's more than capable of reliably printing models. This is still my go-to machine for single color prints, or prints with minimal color changes.

What I didn't like:

Single nozzle machine with outdated color changing options. I'll service these machines until something more serious than a belt/printhead/nozzle needs replacement and then I will replace with a Snapmaker U1 (already have 4)... or hopefully the next version with 5+ toolheads.

View In-Depth Breakdown

Comments (0)

Owner wall

Own one? Add yours

No verified owners yet. Post a photo of yours with your code and be the first on the wall.

Price history

Official US store, checked weekly

Wait for a sale. Now $349. Above its usual $314. It has been as low as $200. Tracked since Dec 2025.

$349 now, right at the median ($349)
+$100−$100 $349 DecJan 26FebMarAprMayJunJulAugSepOctNov +$100−$100 $349 Jan 26MarMayJulSepNov
Each week's price against the median price, lightly smoothed. Median $349, lowest $199 (week of Dec 22), highest $349, now $349 ($0 vs median).
Weekly price
Week ofLowest pricevs medianSource
Nov 17, 2025$199−$150store check
Nov 24, 2025$199−$150store check
Dec 1, 2025$199−$150store check
Dec 8, 2025$199−$150store check
Dec 15, 2025$199−$150store check
Dec 22, 2025$199−$150store check
Dec 29, 2025$200−$149store check
Jan 5, 2026$200−$149store check
Jan 12, 2026$200−$149store check
Jan 19, 2026$200−$149store check
Jan 26, 2026$200−$149store check
Feb 2, 2026$200−$149store check
Feb 9, 2026$200−$149store check
Feb 16, 2026$200−$149store check
Feb 23, 2026$200−$149store check
Mar 2, 2026$200−$149store check
Mar 9, 2026$247−$102store check
Mar 16, 2026$247−$102store check
Mar 23, 2026$349$0store check
Mar 30, 2026$349$0store check
Apr 6, 2026$349$0store check
Apr 13, 2026$349$0store check
Apr 20, 2026$349$0store check
Apr 27, 2026$349$0store check
May 4, 2026$349$0store check
May 11, 2026$349$0store check
May 18, 2026$349$0store check
May 25, 2026$349$0store check
Jun 1, 2026$349$0store check
Jun 8, 2026$349$0store check
Jun 15, 2026$349$0store check
Jun 22, 2026$349$0store check
Jun 29, 2026$349$0store check
Jul 6, 2026$349$0store check
Jul 13, 2026$349$0store check
Jul 20, 2026$349$0store check
Jul 27, 2026$349$0store check
Aug 3, 2026$349$0store check
Aug 10, 2026$349$0store check
Aug 17, 2026$349$0store check
Aug 24, 2026$349$0store check
Aug 31, 2026$349$0store check
Sep 7, 2026$349$0store check
Sep 14, 2026$349$0store check
Sep 21, 2026$349$0store check
Sep 28, 2026$349$0store check
Oct 5, 2026$349$0store check
Oct 12, 2026$349$0store check
Oct 19, 2026$349$0store check
Oct 26, 2026$349$0store check
Nov 2, 2026$349$0store check
Nov 9, 2026$349$0store check
Nov 16, 2026$349$0store check

Known issues 3

Report an issue

From brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.

  • Medium Purge waste lands on prints; heavy filament waste Last reported Oct 2026

    On the Kobra 3 V2 the purge slide does not always clear the nozzle, so filament residue gets dragged onto prints, and the waste flinger can get stuck and throw purge onto the bed. Multicolor prints can waste as much filament as the part itself (about 100 g on one PLA print).

    What fixes it: One reviewer only fixed purge residue on prints by adding a rubber strip to the purge slide. Printing many multicolor parts on one plate lowers the relative waste, and the flung waste needs to be contained.

    From public reports: notebookcheck.net, creativebloq.com, tomshardware.com · Confirm or add a fix

  • Medium ACE Pro false clog/tangle errors and feed failures Last reported Dec 2025

    The ACE Pro reports clogs or tangled filament that are not there, misfeeds or loads the wrong color, and on some units stops feeding to the toolhead after a while. Owners have reported it since the Kobra 3 Combo launched in mid 2024, and it was still a main complaint in late 2025 reviews of the V2.

    What fixes it: Check the PTFE tubes and the 4-way hub on the toolhead for blockages, clear jams in the ACE Pro feed path, and make sure the spool turns freely. Persistent cases go to Anycubic support for replacement parts.

    From public reports: reddit.com, reddit.com, creativebloq.com, tomshardware.com · Confirm or add a fix

  • Low AI spaghetti detection too sensitive Last reported Dec 2025

    The camera failure detection threw false alarms and paused good prints. A later firmware update added a sensitivity setting, which helps but has not ended it for everyone.

    What fixes it: Update firmware and lower the detection sensitivity; some owners still turn it off.

    From public reports: tomshardware.com, creativebloq.com · Confirm or add a fix

Older or fixed issues (2)
  • Medium First-layer and leveling failures on original Kobra 3 Last reported May 2025

    Anycubic said bed leveling and print success rates were among the biggest owner concerns with the original Kobra 3. The V2 changed the hardware (Y axis widened from 40 to 60 mm, new SG15 X bearing, LeviQ 3.0) to address it.

    What fixes it: Anycubic has not described a retrofit for the original Kobra 3; the structural changes only exist in the V2 hardware.

    From public reports: store.anycubic.com, reddit.com · Confirm or add a fix

  • Medium Nozzle leaks filament Fixed May 2025

    Anycubic acknowledged occasional filament leaking from the nozzle on the original Kobra 3. It moved to the Kobra S1 nozzle design with better sealing, and says units bought after Q4 2024 already have the change.

    What fixes it: Hardware fix: later production and the Kobra 3 V2 use the S1-style nozzle. Anycubic says owners of earlier units can buy the V2 nozzle.

    From public reports: store.anycubic.com · Confirm or add a fix

Specs

An open-frame bed slinger with a 250 × 250 × 260 mm build volume and a 300 °C direct-drive hotend. It is aimed at beginners and hobbyists who want affordable multicolor printing, since it pairs with Anycubic's ACE Pro unit for 4 colors, or 8 with two units.

250 × 250 × 260 mmbuild volume
Bed slinger, open frameformat
300 °Cmax nozzle
110 °Cmax bed
None (open frame)chamber
600 mm/smax speed
1 (4-color with ACE Pro combo)toolheads
Anycubic ACE 2 Promulticolor add-on
June 2024released

Consider instead

What the press said · 10.0 from 1 press outlet · Read them

What reviewers say 10.0 from 1

How scores work
  • 10.0 GamesRadar+An easy recommendation for newcomers who want painless multicolor printing, with fast, high quality output from the Combo … 5/5 · Jul 2024

    An easy recommendation for newcomers who want painless multicolor printing, with fast, high quality output from the Combo bundle.

    • Simple four-spool multicolor printing
    • Fast with good print quality
    • Premium feel
    • ACE Pro roughly doubles the footprint
    • Learning curve for color painting
    • A filament tangle needed disassembly

    Read the full review on GamesRadar+ · by Benjamin Abbott