8.9from 7 owners · early
9.33 press
Anycubic Kobra X
Not enough owners for a score yet. Here's what they say so far.
4 of 5 owners · 1 more and the score goes live.
Paid link. We may earn a commission at no extra cost to you. How this works
Price checked Nov 7 on the official US store.
Owner reviews 4 Rate it (10 seconds)
Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.
Not enough owner reviews for an overall owner rating yet: 4 of 5. Every rating is shown below as it comes in. Own one? Add yours.
8/10 and would buy again
Owned 1 to 2 years
10/10 and would buy again
Owned 1 to 2 years · Biggest problem: None
Comments (0)
7/10, hard to justify buying it again
Biggest problem: Heat break clog + quick-swap nozzle can be hard to change
4 colors, 300EUR at preorder. Works flawlessly for multicolor TPU.
Nozzle can be hard to change.
Comments (0)
8/10 and would buy again
Owned 1 to 6 months · Biggest problem: The filament tangle/jam detection was constantly triggering false positive errors. Disabling it made the printer pretty reliable.
Comments (0)
Owner wall
Own one? Add yoursNo verified owners yet. Post a photo of yours with your code and be the first on the wall.
Price history
Official US store, checked weeklyNormal price. Now $299. About its usual $304. Tracked since Dec 2025.
| Week of | Lowest price | vs median | Source |
|---|---|---|---|
| Dec 22, 2025 | $200 | −$99 | store check |
| Dec 29, 2025 | $200 | −$99 | store check |
| Jan 5, 2026 | $200 | −$99 | store check |
| Jan 12, 2026 | $200 | −$99 | store check |
| Jan 19, 2026 | $279 | −$20 | store check |
| Jan 26, 2026 | $279 | −$20 | store check |
| Feb 2, 2026 | $279 | −$20 | store check |
| Feb 9, 2026 | $279 | −$20 | store check |
| Feb 16, 2026 | $279 | −$20 | store check |
| Feb 23, 2026 | $279 | −$20 | store check |
| Mar 2, 2026 | $279 | −$20 | store check |
| Mar 9, 2026 | $279 | −$20 | store check |
| Mar 16, 2026 | $299 | $0 | store check |
| Mar 23, 2026 | $279 | −$20 | store check |
| Mar 30, 2026 | $279 | −$20 | store check |
| Apr 6, 2026 | $279 | −$20 | store check |
| Apr 13, 2026 | $349 | +$50 | store check |
| Apr 20, 2026 | $299 | $0 | dated deal report |
| Apr 27, 2026 | $299 | $0 | store check |
| May 4, 2026 | $299 | $0 | store check |
| May 11, 2026 | $299 | $0 | store check |
| May 18, 2026 | $279 | −$20 | store check |
| May 25, 2026 | $279 | −$20 | store check |
| Jun 1, 2026 | $279 | −$20 | store check |
| Jun 8, 2026 | $279 | −$20 | store check |
| Jun 15, 2026 | $279 | −$20 | store check |
| Jun 22, 2026 | $279 | −$20 | store check |
| Jun 29, 2026 | $349 | +$50 | store check |
| Jul 6, 2026 | $349 | +$50 | store check |
| Jul 13, 2026 | $344 | +$45 | store check |
| Jul 20, 2026 | $344 | +$45 | store check |
| Jul 27, 2026 | $344 | +$45 | store check |
| Aug 3, 2026 | $344 | +$45 | store check |
| Aug 10, 2026 | $344 | +$45 | store check |
| Aug 17, 2026 | $344 | +$45 | store check |
| Aug 24, 2026 | $344 | +$45 | store check |
| Aug 31, 2026 | $344 | +$45 | store check |
| Sep 7, 2026 | $344 | +$45 | store check |
| Sep 14, 2026 | $344 | +$45 | store check |
| Sep 21, 2026 | $344 | +$45 | store check |
| Sep 28, 2026 | $344 | +$45 | store check |
| Oct 5, 2026 | $344 | +$45 | store check |
| Oct 12, 2026 | $299 | $0 | store check |
| Oct 19, 2026 | $299 | $0 | store check |
| Oct 26, 2026 | $299 | $0 | store check |
| Nov 2, 2026 | $299 | $0 | store check |
| Nov 9, 2026 | $299 | $0 | store check |
| Nov 16, 2026 | $299 | $0 | store check |
Known issues 3
Report an issueFrom brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.
-
Medium Filament slot jams and track errors
Individual filament slots can jam or throw filament track errors during loading or color changes. One long-term owner found metal debris in the print head of an early-batch unit, and Anycubic replaced the head and sensor board.
What fixes it: Unload and reload the filament. If a slot keeps jamming, contact Anycubic support, which sent one owner a replacement print head and sensor board at no cost.
From public reports: all3dp.com, youtube.com · Confirm or add a fix
-
Low Anycubic Slicer Next crashes
The bundled slicer can crash; one hands-on review saw crashes on two separate days, both while changing colors on a model. All3DP noted enough crash complaints that OrcaSlicer with a community profile is commonly recommended, though its own testing had no trouble.
What fixes it: Save often, keep the slicer updated, or use OrcaSlicer with a community Kobra X profile.
From public reports: all3dp.com, fabbaloo.com · Confirm or add a fix
-
Low Color bleed with stock purge settings
Default purge volumes are too conservative, especially for lighter materials, so previous colors bleed into the next. One long-term owner saw it most on yellow prints after black.
What fixes it: Raise flush volumes in the slicer; All3DP suggests a community OrcaSlicer profile as another way to fix purge settings.
From public reports: all3dp.com, youtube.com · Confirm or add a fix
Specs
An open-frame bed slinger with a 260 mm cube build volume and native 4-color printing built in, without a separate filament unit. It is aimed at beginners and families wanting low-cost multicolor printing, and adds a camera with AI failure detection and expansion to 19 colors via ACE 2 Pro.
Consider instead
8.9from 7 owners · early
9.33 press
8.7from 9 owners · early
9.52 press
What the press said · 9.0 from 1 press outlet · Read them
What reviewers say 9.0 from 1
How scores work-
9.0 TechRadarA budget four-color printer that prints fast and accurately and is a solid general-purpose pick, though the open …
A budget four-color printer that prints fast and accurately and is a solid general-purpose pick, though the open frame limits engineering materials.
- Low price
- Native four-color printing
- Fast and accurate
- Open frame limits materials
- Lots of purge waste
- Costs climb past four colors
Read the full review on TechRadar · by Alastair Jennings
KeoPrints review
Not counted in the Internet scoreKeo calls the Kobra X pretty neat and says he will keep using it in his print farm, because putting the multicolor unit in the toolhead makes color prints finish much sooner for around $300. He thinks this style of printer still has a place for now, though tool changers may make it outdated soon.
Pros, cons and the video
- Multicolor unit in the toolhead shortens color changes and print times
- Good print quality and solid bed adhesion on his tests
- Spools mount on top, keeping the setup compact and beginner friendly
- AI spaghetti detection kept pausing prints until a firmware fix
- Anycubic slicer is slow and sometimes switches to Chinese
- Manual filament loading is awkward and very soft TPU will not print
Jan 16, 2026 · Printer provided by Anycubic
Comments (0)
Log in to join the discussion.