Skip to content

Bambu Lab H2D

Not enough owners for a score yet. Here's what they say so far. Good time to buy.

Bambu Lab H2D

4 of 5 owners · 1 more and the score goes live.

Own one? Tap your score:
$1,399 was $1,549
10% offLowest in 90 days
Buy at Bambu Lab

Price checked Nov 9 on the official US store.

Owner reviews 4 Rate it (10 seconds)

Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.

Not enough owner reviews for an overall owner rating yet: 4 of 5. Every rating is shown below as it comes in. Own one? Add yours.

L
LarryNelsonSrEarned Spools November 9, 2026
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ 10
Recommends this

H2D w 40W Laser

What I liked:

Large build volume and great community support. Wiki and training videos are a big pus. Ability to do everything I throw at it. The laser and cutter modules are a big plus. Heated chamber gives flexibility in materials. For adhesion issues glue is your friend. Keep it clean.

What I didn't like:

This is very heavy. Rear Z screw is hard to get to for cleaning (use gear floss). Finding parts on company web site can be a problem. Support response time can be long. Laser alignment can be difficult with camera offset.

View In-Depth Breakdown

Comments (0)

S
shaunmckinnonEarned Spools November 9, 2026
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ 8
Recommends this

8/10 and would buy again

Owned 1 to 2 years · Biggest problem: Right nozzle thermals went. Thermistor stopped working and the heater started running having runaway heating, resulting in it melting everything around it. Easy to replace just annoying on a machine that’s just over a year old.

What I liked:

What I didn't like:

Comments (0)

O
owner-51823Earned Spools November 9, 2026
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ 9
Recommends this

9/10 and would buy again

Owned 6 to 12 months · Biggest problem: Sometimes the Slicer get confused

What I liked:

What I didn't like:

Comments (0)

P
PeterBEarned Spools November 9, 2026
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ 10
Recommends this

10/10 and would buy again

Owned 6 to 12 months

What I liked:

What I didn't like:

Comments (0)

Owner wall

Own one? Add yours

No verified owners yet. Post a photo of yours with your code and be the first on the wall.

Price history

Official US store, checked weekly

Good time to buy. Now $1,399. At or near the lowest price we have tracked. Tracked since Jun 2026.

$1,399 now, $500 below the median ($1,899)
+$200−$200+$400−$400+$600−$600 $1,899 DecJan 26FebMarAprMayJunJulAugSepOctNov +$400−$400 $1,899 Jan 26MarMayJulSepNov
Each week's price against the median price, lightly smoothed. Median $1,899, lowest $1,399 (week of Nov 16), highest $1,899, now $1,399 (−$500 vs median). 49 of 53 weeks are filled from launch announcements, brand sale emails or dated deal reports rather than our own store checks; hover a week to see which. Reported sales are assumed to last two weeks unless we know otherwise.
Weekly price
Week ofLowest pricevs medianSource
Nov 17, 2025$1,899$0launch price
Nov 24, 2025$1,899$0launch price
Dec 1, 2025$1,899$0launch price
Dec 8, 2025$1,899$0launch price
Dec 15, 2025$1,899$0launch price
Dec 22, 2025$1,899$0launch price
Dec 29, 2025$1,899$0launch price
Jan 5, 2026$1,899$0launch price
Jan 12, 2026$1,899$0launch price
Jan 19, 2026$1,899$0launch price
Jan 26, 2026$1,899$0launch price
Feb 2, 2026$1,899$0launch price
Feb 9, 2026$1,899$0launch price
Feb 16, 2026$1,899$0launch price
Feb 23, 2026$1,899$0launch price
Mar 2, 2026$1,899$0launch price
Mar 9, 2026$1,899$0launch price
Mar 16, 2026$1,899$0launch price
Mar 23, 2026$1,899$0launch price
Mar 30, 2026$1,899$0launch price
Apr 6, 2026$1,899$0launch price
Apr 13, 2026$1,899$0launch price
Apr 20, 2026$1,899$0launch price
Apr 27, 2026$1,899$0launch price
May 4, 2026$1,899$0launch price
May 11, 2026$1,899$0launch price
May 18, 2026$1,899$0launch price
May 25, 2026$1,899$0launch price
Jun 1, 2026$1,899$0launch price
Jun 8, 2026$1,899$0launch price
Jun 15, 2026$1,899$0launch price
Jun 22, 2026$1,499−$400dated deal report
Jun 29, 2026$1,499−$400dated deal report
Jul 6, 2026$1,499−$400estimated end of a sale
Jul 13, 2026$1,749−$150estimated end of a sale
Jul 20, 2026$1,749−$150estimated end of a sale
Jul 27, 2026$1,749−$150estimated end of a sale
Aug 3, 2026$1,749−$150estimated end of a sale
Aug 10, 2026$1,749−$150estimated end of a sale
Aug 17, 2026$1,749−$150estimated end of a sale
Aug 24, 2026$1,749−$150estimated end of a sale
Aug 31, 2026$1,749−$150estimated end of a sale
Sep 7, 2026$1,749−$150estimated end of a sale
Sep 14, 2026$1,749−$150estimated end of a sale
Sep 21, 2026$1,749−$150estimated end of a sale
Sep 28, 2026$1,749−$150estimated end of a sale
Oct 5, 2026$1,749−$150estimated end of a sale
Oct 12, 2026$1,749−$150estimated end of a sale
Oct 19, 2026$1,749−$150estimated end of a sale
Oct 26, 2026$1,399−$500store check
Nov 2, 2026$1,399−$500store check
Nov 9, 2026$1,399−$500store check
Nov 16, 2026$1,399−$500store check

Known issues 2, 1 serious

Report an issue

From brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.

  • High Toolhead collisions bend the nozzle flow blocker Last reported Oct 2026

    Owners report the toolhead hitting the purge and wiper area, bending or tearing the nozzle flow blocker, especially after prints that end on the left nozzle. Damage includes bent blockers, torn gaskets and at least one damaged plate; an early unit also had a misassembled purge wiper that trapped the toolhead. One owner said firmware 01.02.00.00 reduced it; others still saw it on 01.02.02.00.

    What fixes it: Check the blocker position and clear oozed filament before each print, and reshape a bent blocker per Bambu's guidance. Send logs to support for replacement parts.

    From public reports: forum.bambulab.com, forum.bambulab.com · Confirm or add a fix

  • Medium Gaps on first and top layers with stock profiles Last reported Oct 2026

    H2D owners report gaps on first and top layers and inconsistent first-layer extrusion between left and right nozzles, hurting color-to-color bonding. Bambu developers acknowledged the problem on GitHub and promised a slicer mitigation, while some support replies called it a limitation of the technology.

    What fixes it: Owners calibrate flow manually per nozzle, raise first-layer flow slightly, increase infill/wall overlap, and use monotonic lines. Results are mixed.

    From public reports: github.com, forum.bambulab.com · Confirm or add a fix

Older or fixed issues (2)
  • Low Uneven heatbed temperature with cool spots Last reported Jul 2025

    Reviewers including CNC Kitchen measured up to about 10 °C variation across the H2D bed and linked a cool spot to adhesion failures, mostly with PLA. Bambu said variation is largest during heat-up and settles to about 4 to 7 °C after 5 to 6 minutes, with minimal effect on adhesion.

    What fixes it: Preheat the bed for several minutes before printing, keep the door closed for high-temp materials, and clean the plate.

    From public reports: forum.bambulab.com · Confirm or add a fix

  • High Beta firmware calibration crashed nozzle into wiper Fixed May 2025

    Firmware V01.01.02.04 (May 2025) had a calibration bug where the right nozzle hit the wiper during left-nozzle calibration, and owners reported a damaged nozzle stopper. Bambu pulled it and released V01.01.02.07 days later with a fix.

    What fixes it: Update past 01.01.02.04. Damaged nozzle stoppers or wipers need replacement parts from support.

    From public reports: 3dprintingindustry.com, github.com · Confirm or add a fix

Specs

A large enclosed CoreXY printer with two nozzles on one toolhead, so it can print two materials or support material without swapping filament. It is aimed at engineering and small-business users, with a 350 °C hotend, a 65 °C actively heated chamber, and optional laser and cutting modules.

325 × 320 × 325 mmbuild volume
CoreXY, enclosedformat
350 °Cmax nozzle
120 °Cmax bed
65 °C (active heating)chamber
1000 mm/smax speed
2 (dual nozzle)toolheads
March 2025released

Consider instead

What the press said · 9.5 from 2 press outlets · Read them

What reviewers say 9.5 from 2

How scores work
  • 10.0 Tom's HardwareAn Editor's Choice premium printer with a bigger build volume, faster AMS and a dual hotend that cuts … 5/5 · Mar 2025

    An Editor's Choice premium printer with a bigger build volume, faster AMS and a dual hotend that cuts waste, but it is expensive and the extras add up.

    • Dual hotend saves material
    • Larger build volume
    • Enclosed for high-temp printing
    • Expensive
    • Proprietary replacement parts
    • Add-ons cost a lot extra

    Read the full review on Tom's Hardware · by Denise Bertacchi

  • 9.0 TechRadarA versatile all-in-one machine whose dual-nozzle printing, laser engraving and cutting rival dedicated tools, with a few workflow … 4.5/5 · Mar 2025

    A versatile all-in-one machine whose dual-nozzle printing, laser engraving and cutting rival dedicated tools, with a few workflow rough edges.

    • Dual-nozzle print head
    • Up to 40 W laser option
    • Capable cutting
    • Small laser work area
    • Workflow issues with advanced materials
    • Purges filament beyond two materials

    Read the full review on TechRadar · by Alastair Jennings

KeoPrints review

Not counted in the Internet score

Keo's take

Keo says there is no way around the H2D being very expensive, and whether it is worth it depends on your use case. For his own dual-color Etsy work the dual nozzle halves print times and cuts purge waste, so he calls it worth it for him, while admitting the cost is hard to justify even then.

Pros, cons and the video
  • Dual nozzle cuts two-color print times roughly in half and reduces purge waste
  • Servo-driven AMS 2 Pro loads and swaps filament much faster
  • Active chamber heating and venting, so door-open or closed is no longer a worry
  • Around $2,700 with the AMS 2 Pro, about $1,000 more than an X1 Carbon
  • Larger build volume is only worth it if you need it
  • Payback is slow even for a print business

May 12, 2025 · Bought by KeoPrints