Skip to content

Creality Ender-3 V3 Plus

No owners yet. Here's everything else.

Creality Ender-3 V3 Plus

0 of 5 owners · 5 more and the score goes live.

Own one? Tap your score:
$339 was $479 Sold out
29% off
Buy at Creality

Paid link. We may earn a commission at no extra cost to you. How this works

Price checked Nov 9 on the official US store.

Owner reviews 0 Rate it (10 seconds)

Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.

No owner reviews yet. If you own a Ender-3 V3 Plus, yours will be the first, and it starts this printer's ranking.

Owner wall

Own one? Add yours

No verified owners yet. Post a photo of yours with your code and be the first on the wall.

Price history

Official US store, checked weekly

Normal price. Now $339. About its usual $338. Tracked since Dec 2025.

$339 now, right at the median ($339)
+$50−$50 $339 DecJan 26FebMarAprMayJunJulAugSepOctNov +$50−$50 $339 Jan 26MarMayJulSepNov
Each week's price against the median price, lightly smoothed. Median $339, lowest $299 (week of Apr 20), highest $339, now $339 ($0 vs median).
Weekly price
Week ofLowest pricevs medianSource
Nov 17, 2025$339$0store check
Nov 24, 2025$339$0store check
Dec 1, 2025$339$0store check
Dec 8, 2025$339$0store check
Dec 15, 2025$339$0store check
Dec 22, 2025$339$0store check
Dec 29, 2025$339$0store check
Jan 5, 2026$339$0store check
Jan 12, 2026$339$0store check
Jan 19, 2026$339$0store check
Jan 26, 2026$339$0store check
Feb 2, 2026$339$0store check
Feb 9, 2026$339$0store check
Feb 16, 2026$339$0store check
Feb 23, 2026$339$0store check
Mar 2, 2026$339$0store check
Mar 9, 2026$339$0store check
Mar 16, 2026$339$0store check
Mar 23, 2026$339$0store check
Mar 30, 2026$339$0store check
Apr 6, 2026$299−$40store check
Apr 13, 2026$299−$40store check
Apr 20, 2026$299−$40store check
Apr 27, 2026$339$0store check
May 4, 2026$339$0store check
May 11, 2026$339$0store check
May 18, 2026$339$0store check
May 25, 2026$339$0store check
Jun 1, 2026$339$0store check
Jun 8, 2026$339$0store check
Jun 15, 2026$339$0store check
Jun 22, 2026$339$0store check
Jun 29, 2026$339$0store check
Jul 6, 2026$339$0store check
Jul 13, 2026$339$0store check
Jul 20, 2026$339$0store check
Jul 27, 2026$339$0store check
Aug 3, 2026$339$0store check
Aug 10, 2026$339$0store check
Aug 17, 2026$339$0store check
Aug 24, 2026$339$0store check
Aug 31, 2026$339$0store check
Sep 7, 2026$339$0store check
Sep 14, 2026$339$0store check
Sep 21, 2026$339$0store check
Sep 28, 2026$339$0store check
Oct 5, 2026$339$0store check
Oct 12, 2026$339$0store check
Oct 19, 2026$339$0store check
Oct 26, 2026$339$0store check
Nov 2, 2026$339$0store check
Nov 9, 2026$339$0store check
Nov 16, 2026$339$0store check

Known issues 3, 2 serious

Report an issue

From brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.

  • High Printer locks up after a Creality Print 6 update Last reported May 2026

    Many owners found the printer unresponsive after installing or using Creality Print 6: no temperature readings, homing or file list, and firmware updates that hang. Owners blamed a bad file or job sent from the new slicer. Most reports came in late December 2024 and early January 2025. One owner said a later Creality update fixed it, but another said many printers stayed bricked.

    What fixes it: Owners recovered by logging into the printer's web interface (Fluidd on port 4408) and deleting recent jobs and files, or by a root SSH factory reset, then reflashing firmware. Creality support suggested a mainboard replacement to at least one owner.

    From public reports: forum.creality.com, forum.creality.com · Confirm or add a fix

  • High Leveling sensor errors CL2529 / Key 2529 stop the printer Last reported May 2026

    The printer shows CL2529 or Key 2529 (leveling sensor interference or chip fault), the nozzle stops short of the bed or never touches it, and printing cannot start. More than 30 owners reported it, many after updating to firmware 1.2.3.23 or a newer Creality Print release, others after days, months or over 1,000 hours of use.

    What fixes it: Owners report fixes including lifting the bed and reseating the strain gauge connectors, adjusting the bed screws (too loose or too tight), rolling back to firmware 1.2.3.21 or Creality Print 5, and renaming G-code files to plain letters. Results are mixed and the error returned for some. Creality has sent replacement strain gauges, and in one case a mainboard, when contacted.

    From public reports: forum.creality.com, forum.creality.com · Confirm or add a fix

  • Medium Extruder clicking and extrusion failures Last reported Mar 2026

    The extruder clicks or grinds and filament stops feeding partway into a print even though the nozzle is not clogged. Causes found by owners vary: a gear rubbing on a metal part inside the extruder, a worn nozzle, or a hotend heater wire coming loose and giving wrong temperatures.

    What fixes it: Check and clean the drive gears, check gear tension and recut the filament, then try a new nozzle. If clicking continues, inspect the hotend heater wiring; one owner fixed it only by moving to a K1C hotend after finding a loose heater wire. Results are mixed.

    From public reports: forum.creality.com, forum.creality.com · Confirm or add a fix

Specs

A bigger version of the CoreXZ Ender-3 V3 with a 300 × 300 mm bed and dual Z motors. Suits hobbyists who want a larger open-frame printer with good speed at a mid-range price.

300 × 300 × 330 mmbuild volume
CoreXZ, open frameformat
300 °Cmax nozzle
100 °Cmax bed
None (open frame)chamber
600 mm/smax speed
1toolheads
May 2024released

Consider instead

What the press said · 9.0 from 1 press outlet · Read them

What reviewers say 9.0 from 1

How scores work
  • 9.0 TechRadarAn impressive large format printer on a budget that ranks among the best in its class for value … 4.5/5 · Nov 2024

    An impressive large format printer on a budget that ranks among the best in its class for value and print quality.

    • Large 300 x 300 x 330 mm build volume
    • Fast print speeds
    • Sturdy die-cast frame
    • Noisy at high speed
    • Bed slinger takes up a lot of space
    • No multi-filament support

    Read the full review on TechRadar · by Alastair Jennings