Skip to content

Elegoo OrangeStorm Giga

No owners yet. Here's everything else.

Elegoo OrangeStorm Giga

0 of 5 owners · 5 more and the score goes live.

Own one? Tap your score:
$2,499 was $3,125
20% off
Buy at Elegoo

Paid link. We may earn a commission at no extra cost to you. How this works

Price checked Nov 7 on the official US store.

Owner reviews 0 Rate it (10 seconds)

Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.

No owner reviews yet. If you own a OrangeStorm Giga, yours will be the first, and it starts this printer's ranking.

Owner wall

Own one? Add yours

No verified owners yet. Post a photo of yours with your code and be the first on the wall.

Price history

Official US store, checked weekly

Normal price. Now $2,499. About its usual $2,426. Tracked since Nov 2025.

$2,499 now, $100 above the median ($2,399)
+$50−$50+$100−$100 $2,399 +$100 DecJan 26FebMarAprMayJunJulAugSepOctNov +$100−$100 $2,399 +$100 Jan 26MarMayJulSepNov
Each week's price against the median price, lightly smoothed. Median $2,399, lowest $2,299 (week of Jan 5), highest $2,499, now $2,499 (+$100 vs median).
Weekly price
Week ofLowest pricevs medianSource
Nov 17, 2025$2,299.99−$99store check
Nov 24, 2025$2,299.99−$99store check
Dec 1, 2025$2,299.99−$99store check
Dec 8, 2025$2,299−$100store check
Dec 15, 2025$2,299−$100store check
Dec 22, 2025$2,299−$100store check
Dec 29, 2025$2,299−$100store check
Jan 5, 2026$2,299−$100store check
Jan 12, 2026$2,499+$100store check
Jan 19, 2026$2,499+$100store check
Jan 26, 2026$2,499+$100store check
Feb 2, 2026$2,499+$100store check
Feb 9, 2026$2,499+$100store check
Feb 16, 2026$2,499+$100store check
Feb 23, 2026$2,499+$100store check
Mar 2, 2026$2,499+$100store check
Mar 9, 2026$2,499+$100store check
Mar 16, 2026$2,499+$100store check
Mar 23, 2026$2,399$0store check
Mar 30, 2026$2,399$0store check
Apr 6, 2026$2,399$0store check
Apr 13, 2026$2,399$0store check
Apr 20, 2026$2,399$0store check
Apr 27, 2026$2,399$0store check
May 4, 2026$2,399$0store check
May 11, 2026$2,399$0store check
May 18, 2026$2,399$0store check
May 25, 2026$2,399$0store check
Jun 1, 2026$2,399$0store check
Jun 8, 2026$2,399$0store check
Jun 15, 2026$2,399$0store check
Jun 22, 2026$2,399$0store check
Jun 29, 2026$2,399$0store check
Jul 6, 2026$2,399$0store check
Jul 13, 2026$2,399$0store check
Jul 20, 2026$2,399$0store check
Jul 27, 2026$2,399$0store check
Aug 3, 2026$2,399$0store check
Aug 10, 2026$2,399$0store check
Aug 17, 2026$2,399$0store check
Aug 24, 2026$2,399$0store check
Aug 31, 2026$2,399$0store check
Sep 7, 2026$2,499+$100store check
Sep 14, 2026$2,499+$100store check
Sep 21, 2026$2,499+$100store check
Sep 28, 2026$2,499+$100store check
Oct 5, 2026$2,499+$100store check
Oct 12, 2026$2,499+$100store check
Oct 19, 2026$2,499+$100store check
Oct 26, 2026$2,499+$100store check
Nov 2, 2026$2,499+$100store check
Nov 9, 2026$2,499+$100store check
Nov 16, 2026$2,499+$100store check

Known issues

Report an issue

From brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.

Nothing reported in the last year. Older problems are below.

Older or fixed issues (3)
  • Medium High power draw can trip a shared circuit Last reported Sep 2024

    The Giga uses five power supplies, and Elegoo lists power draw at 1,530 W with one head plus 100 W per extra head. Tom's Hardware warns it can trip your circuit breaker if plugged into the wrong outlet.

    What fixes it: Elegoo says to make sure your setup can handle the total load; run the printer on a circuit with enough spare capacity.

    From public reports: tomshardware.com, us.elegoo.com · Confirm or add a fix

  • Medium Bed leveling is slow and the first layer is hard to get right Last reported Sep 2024

    The bed is four separate magnetic plates on springs, and Tom's Hardware found a full manual adjustment takes about two hours and the plates refuse to stay in balance. Even with auto leveling, the reviewer got no perfect first layers, only good enough ones.

    What fixes it: Tram the plates manually and re-check often. Tom's Hardware used a lot of glue stick for adhesion.

    From public reports: tomshardware.com, us.elegoo.com · Confirm or add a fix

  • Low Seams between the four bed plates mark large prints Last reported Sep 2024

    Because the build surface is split into four plates, parts that cross the center joint get a visible scar on the bottom.

    What fixes it: None reported; the seam is part of the four-plate design.

    From public reports: tomshardware.com, us.elegoo.com · Confirm or add a fix

Specs

A huge open-frame printer with an 800 × 800 × 1000 mm volume, a four-zone heated bed and support for up to four print heads. It suits makers and small shops printing full-size props, furniture parts or batches of parts, and needs plenty of floor space and power.

800 × 800 × 1000 mmbuild volume
Cartesian flying gantry, open frameformat
300 °Cmax nozzle
100 °Cmax bed
None (open frame)chamber
300 mm/smax speed
1toolheads
November 2023released

Consider instead

What the press said · 7.0 from 1 press outlet · Read them

What reviewers say 7.0 from 1

How scores work
  • 7.0 Tom's HardwareA huge machine for extra-large prints that needs its own space and power circuit; leveling is buggy and … 3.5/5 · Sep 2024

    A huge machine for extra-large prints that needs its own space and power circuit; leveling is buggy and slow, but the results justify the effort.

    • Massive print volume
    • High-flow hotend
    • Excellent interface
    • Four-piece bed is hard to level
    • Noisy fans
    • Too big for some doorways

    Read the full review on Tom's Hardware · by Denise Bertacchi