Needs owners2 of 5 so far
9.01 press
Flashforge Adventurer 5M Pro
Not enough owners for a score yet. Here's what they say so far. Good time to buy.
1 of 5 owners · 4 more and the score goes live.
Paid link. We may earn a commission at no extra cost to you. How this works
Price checked Nov 7 on the official US store.
Owner reviews 1 Rate it (10 seconds)
Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.
Not enough owner reviews for an overall owner rating yet: 1 of 5. Every rating is shown below as it comes in. Own one? Add yours.
Used it at school and it was bad.
Nothing really, it prints okay but not the best
A lot of warping, takes long to start a print, prints TAKE a long time, I just went to my machines at home to print my school projects because I don't want to wait 20 hours on a part that takes around 5 hours on my P1S.
Owner wall
Own one? Add yoursNo verified owners yet. Post a photo of yours with your code and be the first on the wall.
Price history
Official US store, checked weeklyGood time to buy. Now $379. At or near the lowest price we have tracked. Tracked since Nov 2025.
| Week of | Lowest price | vs median | Source |
|---|---|---|---|
| Nov 17, 2025 | $449 | $0 | store check |
| Nov 24, 2025 | $449 | $0 | store check |
| Dec 1, 2025 | $449 | $0 | store check |
| Dec 8, 2025 | $449 | $0 | store check |
| Dec 15, 2025 | $449 | $0 | store check |
| Dec 22, 2025 | $449 | $0 | store check |
| Dec 29, 2025 | $449 | $0 | store check |
| Jan 5, 2026 | $449 | $0 | store check |
| Jan 12, 2026 | $449 | $0 | store check |
| Jan 19, 2026 | $449 | $0 | store check |
| Jan 26, 2026 | $449 | $0 | store check |
| Feb 2, 2026 | $449 | $0 | store check |
| Feb 9, 2026 | $449 | $0 | store check |
| Feb 16, 2026 | $449 | $0 | store check |
| Feb 23, 2026 | $449 | $0 | store check |
| Mar 2, 2026 | $449 | $0 | store check |
| Mar 9, 2026 | $449 | $0 | store check |
| Mar 16, 2026 | $449 | $0 | store check |
| Mar 23, 2026 | $449 | $0 | store check |
| Mar 30, 2026 | $449 | $0 | store check |
| Apr 6, 2026 | $449 | $0 | store check |
| Apr 13, 2026 | $449 | $0 | store check |
| Apr 20, 2026 | $449 | $0 | store check |
| Apr 27, 2026 | $449 | $0 | store check |
| May 4, 2026 | $449 | $0 | store check |
| May 11, 2026 | $449 | $0 | store check |
| May 18, 2026 | $449 | $0 | store check |
| May 25, 2026 | $449 | $0 | store check |
| Jun 1, 2026 | $449 | $0 | store check |
| Jun 8, 2026 | $449 | $0 | store check |
| Jun 15, 2026 | $449 | $0 | store check |
| Jun 22, 2026 | $449 | $0 | store check |
| Jun 29, 2026 | $449 | $0 | store check |
| Jul 6, 2026 | $449 | $0 | store check |
| Jul 13, 2026 | $449 | $0 | store check |
| Jul 20, 2026 | $449 | $0 | store check |
| Jul 27, 2026 | $449 | $0 | store check |
| Aug 3, 2026 | $449 | $0 | store check |
| Aug 10, 2026 | $449 | $0 | store check |
| Aug 17, 2026 | $449 | $0 | store check |
| Aug 24, 2026 | $449 | $0 | store check |
| Aug 31, 2026 | $449 | $0 | store check |
| Sep 7, 2026 | $449 | $0 | store check |
| Sep 14, 2026 | $449 | $0 | store check |
| Sep 21, 2026 | $379 | −$70 | store check |
| Sep 28, 2026 | $379 | −$70 | store check |
| Oct 5, 2026 | $379 | −$70 | store check |
| Oct 12, 2026 | $379 | −$70 | store check |
| Oct 19, 2026 | $379 | −$70 | store check |
| Oct 26, 2026 | $379 | −$70 | store check |
| Nov 2, 2026 | $379 | −$70 | store check |
| Nov 9, 2026 | $379 | −$70 | store check |
| Nov 16, 2026 | $379 | −$70 | store check |
Known issues 3
Report an issueFrom brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.
-
Medium Extruder board loses connection; temps read 0 °C
Some Adventurer 5M Pro units lose communication with the extruder board, so nozzle (and sometimes bed) temperatures read 0 °C or -40 °C and the printer will not heat (E0002). Printer Hub's roundups blame connectors that work loose from high-speed vibration and a flexing extruder cable, and the Forge-X FAQ notes defective toolhead electronics on some units.
What fixes it: Power off, open the back cover and reseat the extruder and bed cable connectors. If it returns, replace the extruder cable or extruder board through Flashforge support.
From public reports: printer-hub.com, printer-hub.com, github.com · Confirm or add a fix
-
Medium Mid-print crashes, host errors and E0011 timeouts
The Adventurer 5M Pro can stop mid-print with a frozen screen, a 'Host Error' message or an E0011 error. Flashforge's update log lists fixes for printing crashes (2.3.6) and occasional non-printing problems (2.6.6), but the Forge-X community firmware docs still describe E0011 and MCU shutdowns, tied to complex toolpaths, high memory or CPU use, loose wiring or a failing driver fan.
What fixes it: Update to current Flashforge firmware (the Forge-X FAQ suggests 3.1.4 or later), avoid very dense toolpaths such as fuzzy skin, check that the mainboard driver fan spins and the toolhead wiring is seated, and send logs to Flashforge support if it repeats.
From public reports: flashforge.com, github.com, github.com, printer-hub.com · Confirm or add a fix
-
Low White screen on boot from failing display or cable
Some Adventurer 5M Pro owners get a plain white screen at power-on. Flashforge's FAQ says that if the startup sound still plays, the screen or its cable needs replacing; otherwise contact after-sales.
What fixes it: Reseat the display ribbon cable. If it persists, order the touch screen assembly or claim it under warranty.
From public reports: flashforge.com, printer-hub.com · Confirm or add a fix
Older or fixed issues (2)
-
Low Wi-Fi networks not found or connection fails Fixed
Early Adventurer 5M Pro firmware sometimes failed to list Wi-Fi networks after Wi-Fi was turned on. Flashforge fixed this in 2.7.1 and improved it again in 2.7.2. Its FAQ also says special characters in the network name or password stop the printer from connecting.
What fixes it: Update to 2.7.2-2.2.3 or later, remove special characters from the SSID and password, or use Ethernet.
From public reports: flashforge.com, flashforge.com · Confirm or add a fix
-
Low Early firmware homing and auto-leveling bugs Fixed
Flashforge's update log for the 5M series lists a fix for automatic leveling not running when the Leveling option was ticked (2.7.1) and an improvement for X/Y homing failures (2.7.2). Earlier 2.4.x releases also changed leveling to preheat the bed first. Units on firmware older than 2.7.2 may show these faults on the Adventurer 5M Pro.
What fixes it: Update to the latest Flashforge firmware over the network or by USB.
From public reports: flashforge.com · Confirm or add a fix
Specs
The enclosed version of the Adventurer 5M, adding a sealed chamber, air filtration and a camera. It suits beginners who want a low-cost enclosed machine for home use or occasional ABS/ASA.
Consider instead
Needs owners2 of 5 so far
9.01 press
Needs owners2 of 5 so far
No press
What the press said · 6.0 from 1 press outlet · Read them
What reviewers say 6.0 from 1
How scores work-
6.0 Tom's HardwareImpressive enclosed CoreXY hardware on paper, but the launch software and limited profiles hold the experience back.
Impressive enclosed CoreXY hardware on paper, but the launch software and limited profiles hold the experience back.
- Very fast
- Fully enclosed with air filtration
- Direct drive CoreXY
- Only one slicer profile per nozzle
- Inconsistent auto leveling
- Low resolution webcam
Read the full review on Tom's Hardware · by Andrew Sink
Comments (0)
Log in to join the discussion.