Skip to content
Medium Open Bed Adhesion & Leveling

Uneven bed temperature causes edge warping on large parts

The bed edges run cooler than the center. One review measured up to 8.6 °C of deviation at 60 °C and up to 17 °C at 90 °C and tied it to warped ASA edges; another measured about 6 °C between center and edge at 50 °C and saw slight corner warping on an ABS test cube.

What fixes it

Preheat the chamber before ABS or ASA prints; this removed the corner warping in one review.

Log in to confirm this happens to you 0 owners confirmed

Workarounds (0)

No workarounds posted yet.

Comments (0)

No comments yet.

Log in to comment