Skip to content

Newer version available: the QIDI Plus5.

Medium Open Extrusion & Hotend

PLA and PETG heat creep clogs on first-batch nozzles

A community wiki built from QIDI Discord reports describes a semi-common clog problem on first-batch Plus4 units, mostly with PLA and sometimes PETG, especially on small parts or with lots of retraction. Suspected causes are the first-generation stock nozzle's stainless steel heatbreak and a heatsink fan that is not mounted directly on the heatsink. It does not seem to occur with higher-temperature filaments.

What fixes it

The community wiki reports that QIDI's nozzle with a ceramic (white) heatbreak appears to work, along with a printed heatsink duct and a stronger heatsink fan. Raising nozzle temperature 5 to 10 °C helps but does not fully stop the clogs. QIDI has not announced a fix for first-batch units.

Sources

  1. github.com
Log in to confirm this happens to you 0 owners confirmed

Workarounds (0)

No workarounds posted yet.

Comments (0)

No comments yet.

Log in to comment