Skip to content
Medium Open Extrusion & Hotend

Worn or stuck cutter leaves filament in the path (FR2849)

On long multicolor prints, one owner found a dull cutter blade leaving filament partly cut and an FR2849 retract error. Another had a fragment lodged in the cutter gears, and an owner warns that an overtightened nozzle can block the cutter arm.

What fixes it

Owners suggest replacing the cutter blade (one found third-party blades had reversed magnet polarity), making sure the cutter arm returns freely, and not overtightening the nozzle. No outcome was reported for these fixes.

Log in to confirm this happens to you 0 owners confirmed

Workarounds (0)

No workarounds posted yet.

Comments (0)

No comments yet.

Log in to comment