Creality Hi known issues
What owners run into, most important first. Issues marked "from public reports" come from brand advisories, owner forums and reviews, linked on each one.
-
High Recurring extruder jams and clogs
Owners report the extruder jamming every few weeks or more often, with the printer moving but extruding nothing. One owner's jam pushed off the silicone sock, filled the hotend area and broke the temperature sensor leads. Cleaning and part replacements have only helped temporarily for some.
What fixes it: Owners clean the extruder and hotend and suggest sticking to PLA where possible, not overtightening the nozzle, and not closing a soft enclosure over the printer. One theory is a cut fragment left in the nozzle at color changes. No confirmed fix.
From public reports: forum.creality.com, forum.creality.com, forum.creality.com · Confirm or add a fix
-
Medium Worn or stuck cutter leaves filament in the path (FR2849)
On long multicolor prints, one owner found a dull cutter blade leaving filament partly cut and an FR2849 retract error. Another had a fragment lodged in the cutter gears, and an owner warns that an overtightened nozzle can block the cutter arm.
What fixes it: Owners suggest replacing the cutter blade (one found third-party blades had reversed magnet polarity), making sure the cutter arm returns freely, and not overtightening the nozzle. No outcome was reported for these fixes.
From public reports: forum.creality.com, forum.creality.com, forum.creality.com · Confirm or add a fix
-
Medium CFS buffer stops feeding during prints
Loading from the screen works but during printing the buffer flag drops, the CFS stops pushing and the extruder slips. One owner replaced the buffer and updated firmware without a fix; another replaced the extruder and cables and tried several firmware versions without a fix.
What fixes it: Check that PTFE tubes are seated at the buffer. No confirmed fix yet.
From public reports: forum.creality.com · Confirm or add a fix
-
Low Camera view broke in Creality Print after firmware 1.1.0.72
After firmware 1.1.0.72 (June 2026) several owners found the camera feed stuck loading in Creality Print on Windows, though it still worked in the app and browser. One also reported wall artifacts.
What fixes it: Roll back to 1.1.0.65, or view the camera in Creality Cloud or a browser.
From public reports: forum.creality.com, forum.creality.com · Confirm or add a fix