Elegoo Centauri Carbon 2 known issues
What owners run into, most important first. Issues marked "from public reports" come from brand advisories, owner forums and reviews, linked on each one.
-
Medium Nozzle clogs are hard to clear because of the CANVAS hub
The CANVAS hub collets grip the PTFE tubes so tightly they could not be removed, so clearing an extruder clog means unscrewing the whole hub. The loading routine also does not get hot enough to clear leftover high-temperature filament from the nozzle. Elegoo documents CANVAS feed fault codes 1242, 1243 and 1263, which a reseller guide links to spool drag, poor PTFE seating, wet or oversized filament and partial clogs.
What fixes it: Per the reseller guide: test with one dry known-good spool on one channel, cut a clean tip and reseat PTFE tubes. Clearing an extruder clog itself means removing the hub.
From public reports: tomshardware.com, openelab.io · Confirm or add a fix
-
Low Side spool holders slip or break with some spools
The side-mounted spool holders are sized for Elegoo spools and do not work well with some other brands: one reviewer had a reel slip off, and another broke a holder when a third-party cardboard spool got stuck. The mounts also push spools outward and widen the footprint.
What fixes it: One reviewer stopped slipping by adding a small rubber sticker to the holder.
From public reports: tomshardware.com, techradar.com · Confirm or add a fix