Flashforge AD5X known issues
What owners run into, most important first. Issues marked "from public reports" come from brand advisories, owner forums and reviews, linked on each one.
-
Medium Heavy purge waste and slow color changes
Every color swap purges filament, and multicolor prints can use more plastic than the model itself. Tom's Hardware lost 11 g in 23 swaps on a 9 g part, and 3DPrint.com saw nearly five minutes of repeated purging per color change on a TPU print. Purged plastic is ejected from the machine and will litter the desk or floor if nothing catches it.
What fixes it: Put a bin or tray where the purge is ejected. One owner points to the unofficial ZMOD community firmware to get around the stock firmware's hard-coded purge limits, which may affect warranty.
From public reports: tomshardware.com, 3dprint.com, appleinsider.com, taoofmac.com · Confirm or add a fix
-
Low Loud in operation
The open-frame AD5X is noisy. 3DPrint.com measured about 72 dB average with 80 dB peaks. AppleInsider measured about 60 dB in normal running and about 75 dB at its loudest, with filament ejection and fast moves the loudest parts.
What fixes it: An optional enclosure kit is sold; AppleInsider expects it to cut noise. Otherwise place the printer away from where people work.
From public reports: 3dprint.com, appleinsider.com · Confirm or add a fix
-
Low Flashforge's Orca fork is required for IFS and has bugs
Full IFS multicolor control works through Flashforge's own OrcaSlicer fork, Orca-Flashforge. Tom's Hardware saw it crash about every third print when left running and found that filament loaded on the printer does not sync to the slicer, so it must be entered by hand. Other reviewers criticize rebranding an open-source slicer as Flashforge's own.
What fixes it: Tom's Hardware enters the loaded filament colors and types in the slicer by hand before each multicolor job.
From public reports: tomshardware.com, 3dprint.com, taoofmac.com · Confirm or add a fix