Skip to content

Flashforge AD5X

No owners yet. Here's everything else. Good time to buy.

Flashforge AD5X

0 of 5 owners · 5 more and the score goes live.

Own one? Tap your score:
$349 was $499
30% offLowest in 90 days
Buy at Flashforge

Paid link. We may earn a commission at no extra cost to you. How this works

Price checked Nov 7 on the official US store.

Owner reviews 0 Rate it (10 seconds)

Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.

No owner reviews yet. If you own a AD5X, yours will be the first, and it starts this printer's ranking.

Owner wall

Own one? Add yours

No verified owners yet. Post a photo of yours with your code and be the first on the wall.

Price history

Official US store, checked weekly

Good time to buy. Now $349. At or near the lowest price we have tracked. Tracked since Nov 2025.

$349 now, $50 below the median ($399)
+$50−$50 $399 DecJan 26FebMarAprMayJunJulAugSepOctNov +$50−$50 $399 Jan 26MarMayJulSepNov
Each week's price against the median price, lightly smoothed. Median $399, lowest $349 (week of Nov 16), highest $399, now $349 (−$50 vs median). 1 of 53 weeks are filled from launch announcements, brand sale emails or dated deal reports rather than our own store checks; hover a week to see which. Reported sales are assumed to last two weeks unless we know otherwise.
Weekly price
Week ofLowest pricevs medianSource
Nov 17, 2025$399$0store check
Nov 24, 2025$399$0estimated end of a sale
Dec 1, 2025$399$0store check
Dec 8, 2025$399$0store check
Dec 15, 2025$399$0store check
Dec 22, 2025$399$0store check
Dec 29, 2025$399$0store check
Jan 5, 2026$399$0store check
Jan 12, 2026$399$0store check
Jan 19, 2026$399$0store check
Jan 26, 2026$399$0store check
Feb 2, 2026$399$0store check
Feb 9, 2026$399$0store check
Feb 16, 2026$399$0store check
Feb 23, 2026$399$0store check
Mar 2, 2026$399$0store check
Mar 9, 2026$399$0store check
Mar 16, 2026$399$0store check
Mar 23, 2026$399$0store check
Mar 30, 2026$399$0store check
Apr 6, 2026$399$0store check
Apr 13, 2026$399$0store check
Apr 20, 2026$399$0store check
Apr 27, 2026$399$0store check
May 4, 2026$399$0store check
May 11, 2026$399$0store check
May 18, 2026$399$0store check
May 25, 2026$399$0store check
Jun 1, 2026$399$0store check
Jun 8, 2026$399$0store check
Jun 15, 2026$399$0store check
Jun 22, 2026$399$0store check
Jun 29, 2026$399$0store check
Jul 6, 2026$399$0store check
Jul 13, 2026$399$0store check
Jul 20, 2026$399$0store check
Jul 27, 2026$399$0store check
Aug 3, 2026$399$0store check
Aug 10, 2026$399$0store check
Aug 17, 2026$399$0store check
Aug 24, 2026$399$0store check
Aug 31, 2026$399$0store check
Sep 7, 2026$399$0store check
Sep 14, 2026$399$0store check
Sep 21, 2026$399$0store check
Sep 28, 2026$399$0store check
Oct 5, 2026$399$0store check
Oct 12, 2026$399$0store check
Oct 19, 2026$349−$50store check
Oct 26, 2026$349−$50store check
Nov 2, 2026$349−$50store check
Nov 9, 2026$349−$50store check
Nov 16, 2026$349−$50store check

Known issues 2

Report an issue

From brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.

  • Medium Heavy purge waste and slow color changes Last reported Nov 2026

    Every color swap purges filament, and multicolor prints can use more plastic than the model itself. Tom's Hardware lost 11 g in 23 swaps on a 9 g part, and 3DPrint.com saw nearly five minutes of repeated purging per color change on a TPU print. Purged plastic is ejected from the machine and will litter the desk or floor if nothing catches it.

    What fixes it: Put a bin or tray where the purge is ejected. One owner points to the unofficial ZMOD community firmware to get around the stock firmware's hard-coded purge limits, which may affect warranty.

    From public reports: tomshardware.com, 3dprint.com, appleinsider.com, taoofmac.com · Confirm or add a fix

  • Low Loud in operation Last reported Nov 2026

    The open-frame AD5X is noisy. 3DPrint.com measured about 72 dB average with 80 dB peaks. AppleInsider measured about 60 dB in normal running and about 75 dB at its loudest, with filament ejection and fast moves the loudest parts.

    What fixes it: An optional enclosure kit is sold; AppleInsider expects it to cut noise. Otherwise place the printer away from where people work.

    From public reports: 3dprint.com, appleinsider.com · Confirm or add a fix

Older or fixed issues (1)
  • Low Flashforge's Orca fork is required for IFS and has bugs Last reported Oct 2025

    Full IFS multicolor control works through Flashforge's own OrcaSlicer fork, Orca-Flashforge. Tom's Hardware saw it crash about every third print when left running and found that filament loaded on the printer does not sync to the slicer, so it must be entered by hand. Other reviewers criticize rebranding an open-source slicer as Flashforge's own.

    What fixes it: Tom's Hardware enters the loaded filament colors and types in the slicer by hand before each multicolor job.

    From public reports: tomshardware.com, 3dprint.com, taoofmac.com · Confirm or add a fix

Specs

An open-frame CoreXY printer from Flashforge that ships with its four-color Intelligent Filament System as standard, on a 220 mm cube build volume with a 300 °C hotend and 110 °C bed. Aimed at hobbyists who want multi-color printing at a lower price; an enclosure kit is sold separately.

220 × 220 × 220 mmbuild volume
CoreXY, open frameformat
300 °Cmax nozzle
110 °Cmax bed
None (open frame)chamber
300 mm/s (600 mm/s travel)max speed
1 (4-color IFS built in)toolheads
June 2025released

Consider instead

What the press said · 7.5 from 2 press outlets · Read them

What reviewers say 7.5 from 2

How scores work
  • 8.0 AppleInsiderA good entry model that makes four-color printing affordable and simple, with tradeoffs in waste, print time and … 4/5 · Sep 2025

    A good entry model that makes four-color printing affordable and simple, with tradeoffs in waste, print time and accessory polish.

    • Minimal setup
    • Four-color printing
    • Easy nozzle cleaning and swaps
    • Multicolor adds waste and time
    • No built-in filament storage
    • Awkward power switch placement

    Read the full review on AppleInsider

  • 7.0 Tom's HardwareA stripped-down CoreXY machine with excellent print quality held back by buggy slicer software; lighting, camera and enclosure … 3.5/5 · Oct 2025

    A stripped-down CoreXY machine with excellent print quality held back by buggy slicer software; lighting, camera and enclosure are extra add-ons.

    • Four-color printing
    • Compact footprint with side-mounted spools
    • Quick-change nozzle
    • Buggy slicer
    • No camera or lighting
    • Enclosure is a DIY kit

    Read the full review on Tom's Hardware · by Denise Bertacchi

KeoPrints review

Not counted in the Internet score

Keo's take

In this first-impressions video, Keo says he likes the AD5X a lot more than expected: after about 100 hours its multicolor system looks rock solid and its print quality matches his Bambu machines on Etsy orders. His main complaints are the early firmware problems and Flashforge's reskinned slicer.

Pros, cons and the video
  • Side-mounted spool hubs make the IFS multicolor system compact and reliable
  • Clean, reliable multicolor prints after the firmware fix
  • Built-in carry handles
  • Needed replacement firmware from Flashforge to stop early errors
  • Orca-Flashforge slicer had connection, filament sync and dark mode problems
  • Smaller 220 mm build volume with no enclosure or camera

Sep 8, 2025 · Printer provided by Flashforge