Elegoo Centauri Carbon known issues
Newer version available: the Elegoo Centauri Carbon 2.
What owners run into, most important first. Issues marked "from public reports" come from brand advisories, owner forums and reviews, linked on each one.
-
Low Filament unload/reverse feed fails
On firmware 1.1.42 to 1.1.46 the loader sometimes pushes filament the wrong way or fails to retract, so filament can't be unloaded and color changes fail.
What fixes it: Power cycle the printer, which clears it for that session. Do not roll back to 1.1.25.
From public reports: slickdeals.net, printer-hub.com · Confirm or add a fix
-
Low Exhaust fan runs during prints and won't turn off
The chamber exhaust fan can spin up during prints and cannot be properly controlled: a community roundup says any non-zero slicer speed becomes 100% and turning it off on the screen resets on the next layer. One owner tied it to firmware 1.1.46.
What fixes it: Owners work around it by setting the filament type to ABS in the profile or repeatedly injecting M106 P3 S0 in the G-code; community OpenCentauri firmware (beta) adds proper control.
From public reports: slickdeals.net, printer-hub.com · Confirm or add a fix
-
Medium Clogs when printing PLA/TPU with the lid on
The enclosure holds heat, which can soften PLA and TPU above the melt zone and leads to clogging warnings. Elegoo puts a sticker on the lid telling owners to remove the top cover for PLA and flexible filaments.
What fixes it: Remove the glass lid and keep the door open for PLA and TPU, as Elegoo advises. A vented riser worked for one reviewer on shorter TPU prints.
From public reports: all3dp.com, fabbaloo.com · Confirm or add a fix