Anycubic Kobra S1 known issues
What owners run into, most important first. Issues marked "from public reports" come from brand advisories, owner forums and reviews, linked on each one.
-
Medium ACE Pro misfeeds, slow loading and feed errors
The ACE Pro multicolor unit sometimes fails to feed or misfeeds when loading, and slots 3 and 4 can take several attempts. Reviewers also saw retraction errors, grinding while loading, a loose feed tube that popped out, and the unit unloading and reloading every spool before a print. Small sample spools and some light cardboard spools do not work well.
What fixes it: Retry the load, check that the feed tube at the back is seated, and avoid small or very light cardboard spools. One reviewer only got a reliable printer after Anycubic sent a replacement unit.
From public reports: reddit.com, tomshardware.com, creativebloq.com · Confirm or add a fix
-
Low AI spaghetti detection triggers false pauses
The camera-based failure detection can pause prints for minor problems, such as a strand trapped under a spool, while still missing some real failures. Tom's Hardware called it overly sensitive and rarely enabled it.
What fixes it: Turn detection off and check prints manually.
From public reports: tomshardware.com, creativebloq.com · Confirm or add a fix
-
Low Heavy purge waste and hard-to-tune flush settings
Multicolor prints throw away a lot of filament: Tom's Hardware reported 730 g wasted on supports, purge tower and poop for a 312 g model. The purge amount cannot be set in the slicer, only on the touchscreen during a print, and there is no option to flush into a purge object. Setting flush too low causes color bleeding.
What fixes it: Adjust purge on the touchscreen during the print, and do not set it too low or colors bleed. No slicer-side fix is reported.
From public reports: tomshardware.com, creativebloq.com · Confirm or add a fix