Skip to content

Anycubic Kobra S1

No owners yet. Here's everything else. Wait for a sale.

Anycubic Kobra S1

0 of 5 owners · 5 more and the score goes live.

Own one? Tap your score:
$379 was $549 Sold out
31% off
Buy at Anycubic

Paid link. We may earn a commission at no extra cost to you. How this works

Price checked Nov 7 on the official US store.

Owner reviews 0 Rate it (10 seconds)

Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.

No owner reviews yet. If you own a Kobra S1, yours will be the first, and it starts this printer's ranking.

Owner wall

Own one? Add yours

No verified owners yet. Post a photo of yours with your code and be the first on the wall.

Price history

Official US store, checked weekly

Wait for a sale. Now $379. Above its usual $360. It has been as low as $349. Tracked since Dec 2025.

$379 now, $30 above the median ($349)
+$50−$50 $349 +$52 DecJan 26FebMarAprMayJunJulAugSepOctNov +$50−$50 $349 +$52 Jan 26MarMayJulSepNov
Each week's price against the median price, lightly smoothed. Median $349, lowest $349 (week of Nov 2), highest $401, now $379 (+$30 vs median).
Weekly price
Week ofLowest pricevs medianSource
Nov 17, 2025$359+$10store check
Nov 24, 2025$359+$10store check
Dec 1, 2025$359+$10store check
Dec 8, 2025$359+$10store check
Dec 15, 2025$359+$10store check
Dec 22, 2025$359+$10store check
Dec 29, 2025$359+$10store check
Jan 5, 2026$359+$10store check
Jan 12, 2026$359+$10store check
Jan 19, 2026$359+$10store check
Jan 26, 2026$359+$10store check
Feb 2, 2026$359+$10store check
Feb 9, 2026$359+$10store check
Feb 16, 2026$359+$10store check
Feb 23, 2026$349$0store check
Mar 2, 2026$349$0store check
Mar 9, 2026$349$0store check
Mar 16, 2026$349$0store check
Mar 23, 2026$349$0store check
Mar 30, 2026$349$0store check
Apr 6, 2026$349$0store check
Apr 13, 2026$349$0store check
Apr 20, 2026$349$0store check
Apr 27, 2026$349$0store check
May 4, 2026$349$0store check
May 11, 2026$349$0store check
May 18, 2026$349$0store check
May 25, 2026$349$0store check
Jun 1, 2026$349$0store check
Jun 8, 2026$349$0store check
Jun 15, 2026$349$0store check
Jun 22, 2026$349$0store check
Jun 29, 2026$349$0store check
Jul 6, 2026$349$0store check
Jul 13, 2026$349$0store check
Jul 20, 2026$349$0store check
Jul 27, 2026$349$0store check
Aug 3, 2026$349$0store check
Aug 10, 2026$349$0store check
Aug 17, 2026$349$0store check
Aug 24, 2026$349$0store check
Aug 31, 2026$349$0store check
Sep 7, 2026$349$0store check
Sep 14, 2026$401+$52store check
Sep 21, 2026$401+$52store check
Sep 28, 2026$401+$52store check
Oct 5, 2026$401+$52store check
Oct 12, 2026$401+$52store check
Oct 19, 2026$401+$52store check
Oct 26, 2026$349$0store check
Nov 2, 2026$349$0store check
Nov 9, 2026$379+$30store check
Nov 16, 2026$379+$30store check

Known issues

Report an issue

From brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.

Nothing reported in the last year. Older problems are below.

Older or fixed issues (3)
  • Medium ACE Pro misfeeds, slow loading and feed errors Last reported May 2025

    The ACE Pro multicolor unit sometimes fails to feed or misfeeds when loading, and slots 3 and 4 can take several attempts. Reviewers also saw retraction errors, grinding while loading, a loose feed tube that popped out, and the unit unloading and reloading every spool before a print. Small sample spools and some light cardboard spools do not work well.

    What fixes it: Retry the load, check that the feed tube at the back is seated, and avoid small or very light cardboard spools. One reviewer only got a reliable printer after Anycubic sent a replacement unit.

    From public reports: reddit.com, tomshardware.com, creativebloq.com · Confirm or add a fix

  • Low AI spaghetti detection triggers false pauses Last reported May 2025

    The camera-based failure detection can pause prints for minor problems, such as a strand trapped under a spool, while still missing some real failures. Tom's Hardware called it overly sensitive and rarely enabled it.

    What fixes it: Turn detection off and check prints manually.

    From public reports: tomshardware.com, creativebloq.com · Confirm or add a fix

  • Low Heavy purge waste and hard-to-tune flush settings Last reported May 2025

    Multicolor prints throw away a lot of filament: Tom's Hardware reported 730 g wasted on supports, purge tower and poop for a 312 g model. The purge amount cannot be set in the slicer, only on the touchscreen during a print, and there is no option to flush into a purge object. Setting flush too low causes color bleeding.

    What fixes it: Adjust purge on the touchscreen during the print, and do not set it too low or colors bleed. No slicer-side fix is reported.

    From public reports: tomshardware.com, creativebloq.com · Confirm or add a fix

Specs

An enclosed CoreXY printer with a 250 mm cube build volume, a 320 °C hotend and a 120 °C bed. It suits hobbyists who want an enclosed machine for PLA through ASA, and it can add multicolor printing with Anycubic's ACE Pro unit, up to 8 colors with two units.

250 × 250 × 250 mmbuild volume
CoreXY, enclosedformat
320 °Cmax nozzle
120 °Cmax bed
Passive (enclosed, no heater)chamber
600 mm/smax speed
1 (4-color with ACE Pro combo)toolheads
Anycubic ACE 2 Promulticolor add-on
January 2025released

Consider instead

What the press said · 8.0 from 2 press outlets · Read them

What reviewers say 8.0 from 2

How scores work
  • 9.0 TechRadarA standout multicolor printer that pairs strong build quality and precision with a very competitive price, held back … 4.5/5 · Mar 2025

    A standout multicolor printer that pairs strong build quality and precision with a very competitive price, held back mainly by the separate ACE Pro power supply.

    • Excellent value
    • High precision
    • Clean multicolor results
    • ACE Pro needs its own power supply
    • Tops out at eight filaments

    Read the full review on TechRadar · by Alastair Jennings

  • 7.0 Tom's HardwareFast, reliable CoreXY hardware with a useful drying spool box, but the slicer hides how much filament color … 3.5/5 · May 2025

    Fast, reliable CoreXY hardware with a useful drying spool box, but the slicer hides how much filament color changes waste, which kept it off the outlet's best list.

    • Fast CoreXY motion with high-flow hotend
    • Four-color ACE unit with built-in dryer
    • Enclosed with carbon filtration
    • Slicer does not show purge waste
    • Filament loading can be fiddly

    Read the full review on Tom's Hardware · by Denise Bertacchi

KeoPrints review

Not counted in the Internet score

Keo's take · 7.5/10

After months of long-term use, Keo says the Kobra S1 is not a bad pick and calls it an excellent printer for the price, giving it 7.5 out of 10. His reservations are Anycubic's forced slicer, the plasticky feel and lingering doubts about ACE reliability rather than failures of the printer itself.

Pros, cons and the video
  • Very competitive price for an enclosed multicolor printer
  • Mobile app printing and monitoring work well, even for beginners
  • ACE can dry filament while printing
  • Locked to Anycubic Slicer Next, which is slower and missing features
  • Panels and door feel plasticky
  • ACE jams and bed adhesion issues make him trust it less than his Bambus

More from the channel: Apr 2025

Dec 22, 2025 · Bought by KeoPrints