QIDI X-Max 3 known issues
Newer version available: the QIDI Max4.
What owners run into, most important first. Issues marked "from public reports" come from brand advisories, owner forums and reviews, linked on each one.
-
Medium Early units had a weak bottom frame Fixed
The first 2023 batch had a bottom frame not strong enough for repeatable prints, and QIDI paused sales to fix it. The relaunched version added a stiffer all-metal frame and bottom crossbars.
What fixes it: QIDI revised the frame before relaunch. When buying used, confirm it is a post-relaunch unit.
From public reports: 3dprintbeginner.com, printer-hub.com · Confirm or add a fix
-
Low Chamber heater overshoot trips thermal protection Fixed
The chamber heater uses on/off control, and when pushed toward 70 °C Klipper often triggers its thermal runaway shutdown. QIDI's firmware 4.3.13 limited chamber heating to 65 °C. Owners also report temperature swings that show as wall banding, which the cap does not change.
What fixes it: Update to 4.3.13 or later. For the swings, owners move the chamber sensor off the metal frame or switch the heater to PID control.
From public reports: 3dprintbeginner.com, github.com, printer-hub.com · Confirm or add a fix