Needs owners4 of 5 so far
9.52 press
QIDI Max4
No owners yet. Here's everything else. Good time to buy.
0 of 5 owners · 5 more and the score goes live.
Paid link. We may earn a commission at no extra cost to you. How this works
Price checked Nov 7 on the official US store.
Owner reviews 0 Rate it (10 seconds)
Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.
No owner reviews yet. If you own a Max4, yours will be the first, and it starts this printer's ranking.
Owner wall
Own one? Add yoursNo verified owners yet. Post a photo of yours with your code and be the first on the wall.
Price history
Official US store, checked weeklyGood time to buy. Now $1,049. At or near the lowest price we have tracked. Tracked since Dec 2025.
| Week of | Lowest price | vs median | Source |
|---|---|---|---|
| Nov 17, 2025 | $1,049 | $0 | store check |
| Nov 24, 2025 | $1,049 | $0 | store check |
| Dec 1, 2025 | $1,049 | $0 | store check |
| Dec 8, 2025 | $1,049 | $0 | store check |
| Dec 15, 2025 | $1,049 | $0 | store check |
| Dec 22, 2025 | $1,049 | $0 | store check |
| Dec 29, 2025 | $1,049 | $0 | store check |
| Jan 5, 2026 | $1,049 | $0 | store check |
| Jan 12, 2026 | $1,049 | $0 | store check |
| Jan 19, 2026 | $1,049 | $0 | store check |
| Jan 26, 2026 | $1,049 | $0 | store check |
| Feb 2, 2026 | $1,049 | $0 | store check |
| Feb 9, 2026 | $1,049 | $0 | store check |
| Feb 16, 2026 | $1,049 | $0 | store check |
| Feb 23, 2026 | $1,049 | $0 | store check |
| Mar 2, 2026 | $1,049 | $0 | store check |
| Mar 9, 2026 | $1,049 | $0 | store check |
| Mar 16, 2026 | $1,049 | $0 | store check |
| Mar 23, 2026 | $1,049 | $0 | store check |
| Mar 30, 2026 | $1,049 | $0 | store check |
| Apr 6, 2026 | $1,049 | $0 | store check |
| Apr 13, 2026 | $1,049 | $0 | store check |
| Apr 20, 2026 | $1,049 | $0 | store check |
| Apr 27, 2026 | $1,049 | $0 | store check |
| May 4, 2026 | $1,049 | $0 | store check |
| May 11, 2026 | $1,049 | $0 | store check |
| May 18, 2026 | $1,049 | $0 | store check |
| May 25, 2026 | $1,049 | $0 | store check |
| Jun 1, 2026 | $1,049 | $0 | store check |
| Jun 8, 2026 | $1,049 | $0 | store check |
| Jun 15, 2026 | $1,049 | $0 | store check |
| Jun 22, 2026 | $1,099 | +$50 | store check |
| Jun 29, 2026 | $1,099 | +$50 | store check |
| Jul 6, 2026 | $1,099 | +$50 | store check |
| Jul 13, 2026 | $1,099 | +$50 | store check |
| Jul 20, 2026 | $1,099 | +$50 | store check |
| Jul 27, 2026 | $1,099 | +$50 | store check |
| Aug 3, 2026 | $1,099 | +$50 | store check |
| Aug 10, 2026 | $1,099 | +$50 | store check |
| Aug 17, 2026 | $1,099 | +$50 | store check |
| Aug 24, 2026 | $1,099 | +$50 | store check |
| Aug 31, 2026 | $1,099 | +$50 | store check |
| Sep 7, 2026 | $1,099 | +$50 | store check |
| Sep 14, 2026 | $1,099 | +$50 | store check |
| Sep 21, 2026 | $1,099 | +$50 | store check |
| Sep 28, 2026 | $1,099 | +$50 | store check |
| Oct 5, 2026 | $1,099 | +$50 | store check |
| Oct 12, 2026 | $1,099 | +$50 | store check |
| Oct 19, 2026 | $1,099 | +$50 | store check |
| Oct 26, 2026 | $1,099 | +$50 | store check |
| Nov 2, 2026 | $1,049 | $0 | store check |
| Nov 9, 2026 | $1,049 | $0 | store check |
| Nov 16, 2026 | $1,049 | $0 | store check |
Known issues 4
Report an issueFrom brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.
-
Medium PLA clogs if the chamber runs too hot
Excess chamber heat can soften PLA in the heatbreak and raise clog risk. QIDI's own FAQ says excessive chamber heat could increase the risk of nozzle clogging, and recommends keeping the chamber about 10 °C under the filament's softening point and no higher than 45 °C for PLA.
What fixes it: Keep the chamber at or below 45 °C for PLA (QIDI). Owners open the front door and slide back the lid for PLA and PETG, or use QIDI's optional Polar Cooler extruder cooler; QIDI says chamber heat can be used with most materials once the cooler is fitted.
From public reports: qidi3d.com, printer-hub.com · Confirm or add a fix
-
Low Loud with the Polar Cooler and QIDI Box running
AndroidPCTV measured about 56 dB normally, 62 dB with the Polar Cooler and 65 dB with the Box. AppleInsider found it fairly quiet without the cooler but would not want it running in a room they work in once the cooler is on.
What fixes it: No fix reported. The extra noise comes from the optional Polar Cooler and QIDI Box.
From public reports: androidpctv.com, appleinsider.com · Confirm or add a fix
-
Low Multicolor prints are slow and wasteful
Single-nozzle color swaps with the QIDI Box add time and purge waste. NikKTech notes multicolor filament waste is still a thing, and AndroidPCTV's three-color test print took 14 hours.
What fixes it: No fix reported in the cited reviews.
From public reports: androidpctv.com, nikktech.com · Confirm or add a fix
-
Low Firmware and software still maturing
Reviewers in 2026 report bugs in QIDI Studio and firmware that occasionally interrupt the workflow; NikKTech could not use timelapse because of them. AndroidPCTV lists firmware and software still being improved as a con.
What fixes it: No specific fix reported in the cited reviews.
From public reports: nikktech.com, androidpctv.com · Confirm or add a fix
Specs
The QIDI Max4 is QIDI's large-format enclosed CoreXY printer, with a 390 × 390 × 340 mm build volume, a 370 °C hotend and an actively heated chamber up to 65 °C. It uses closed-loop FOC steppers and is aimed at users printing large parts in high-temperature and fiber-filled materials.
Consider instead
Needs owners4 of 5 so far
9.52 press
8.7from 15 owners · early
9.03 press
What the press said · 9.0 from 1 press outlet · Read them
What reviewers say 9.0 from 1
How scores work-
9.0 AppleInsiderThe reviewer's favorite printer so far, with excellent print quality and features for experienced users or print farms, …
The reviewer's favorite printer so far, with excellent print quality and features for experienced users or print farms, but too pricey and loud for beginners or shared spaces.
- Guided setup
- Active chamber heating and cooling
- QIDI Box auto-reload on runout
- High cost of entry
- Optional Polar Cooler is noisy
- Mobile app adds little
KeoPrints review
Not counted in the Internet scoreKeo says the Max4 passed all of his tests with flying colors and he is happy to recommend it, after a run of recent QIDI frustrations made him nervous. His main warning is that you need to turn on the chamber heater yourself in the slicer for big warp-prone prints.
Pros, cons and the video
- Large 390 x 390 x 340 mm enclosed, hardened build with a 65 C chamber heater
- Polar Cooler keeps the hotend cool while the chamber stays hot
- Four-day plate of tiny ASA and ABS models printed with zero failures
- QIDI Box will not let you pull filament out by hand
- Bed is not triangulated, so the front and back can wobble
- Chamber heater is off by default in the slicer presets, and a fan is always running
Feb 27, 2026 · Printer provided by QIDI