Needs owners1 of 5 so far
8.52 press
Elegoo Neptune 3 Pro
No owners yet. Here's everything else. Wait for a sale.
Replaced by the Elegoo Neptune 4 Pro.
0 of 5 owners · 5 more and the score goes live.
Paid link. We may earn a commission at no extra cost to you. How this works
Price checked Nov 7 on the official US store.
Owner reviews 0 Rate it (10 seconds)
Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.
No owner reviews yet. If you own a Neptune 3 Pro, yours will be the first, and it starts this printer's ranking.
Owner wall
Own one? Add yoursNo verified owners yet. Post a photo of yours with your code and be the first on the wall.
Price history
Official US store, checked weeklyWait for a sale. Now $259.99. Above its usual $179. It has been as low as $159. Tracked since Nov 2025.
| Week of | Lowest price | vs median | Source |
|---|---|---|---|
| Nov 17, 2025 | $213 | +$44 | estimated end of a sale |
| Nov 24, 2025 | $159.99 | −$9 | store check |
| Dec 1, 2025 | $159.99 | −$9 | store check |
| Dec 8, 2025 | $159.99 | −$9 | store check |
| Dec 15, 2025 | $159 | −$10 | store check |
| Dec 22, 2025 | $159 | −$10 | store check |
| Dec 29, 2025 | $159 | −$10 | store check |
| Jan 5, 2026 | $159 | −$10 | store check |
| Jan 12, 2026 | $159 | −$10 | store check |
| Jan 19, 2026 | $159 | −$10 | store check |
| Jan 26, 2026 | $159 | −$10 | dated deal report |
| Feb 2, 2026 | $169 | $0 | dated deal report |
| Feb 9, 2026 | $169 | $0 | estimated end of a sale |
| Feb 16, 2026 | $213 | +$44 | estimated end of a sale |
| Feb 23, 2026 | $213 | +$44 | estimated end of a sale |
| Mar 2, 2026 | $179 | +$10 | store check |
| Mar 9, 2026 | $179 | +$10 | store check |
| Mar 16, 2026 | $179 | +$10 | store check |
| Mar 23, 2026 | $179 | +$10 | store check |
| Mar 30, 2026 | $179 | +$10 | store check |
| Apr 6, 2026 | $179 | +$10 | store check |
| Apr 13, 2026 | $179 | +$10 | store check |
| Apr 20, 2026 | $179 | +$10 | store check |
| Apr 27, 2026 | $179 | +$10 | store check |
| May 4, 2026 | $179 | +$10 | store check |
| May 11, 2026 | $179 | +$10 | store check |
| May 18, 2026 | $179 | +$10 | store check |
| May 25, 2026 | $169 | $0 | store check |
| Jun 1, 2026 | $169 | $0 | store check |
| Jun 8, 2026 | $169 | $0 | store check |
| Jun 15, 2026 | $169 | $0 | store check |
| Jun 22, 2026 | $169 | $0 | store check |
| Jun 29, 2026 | $169 | $0 | store check |
| Jul 6, 2026 | $169 | $0 | store check |
| Jul 13, 2026 | $169 | $0 | store check |
| Jul 20, 2026 | $179 | +$10 | store check |
| Jul 27, 2026 | $179 | +$10 | store check |
| Aug 3, 2026 | $179 | +$10 | store check |
| Aug 10, 2026 | $179 | +$10 | store check |
| Aug 17, 2026 | $169 | $0 | store check |
| Aug 24, 2026 | $169 | $0 | store check |
| Aug 31, 2026 | $169 | $0 | store check |
| Sep 7, 2026 | $169 | $0 | store check |
| Sep 14, 2026 | $169 | $0 | store check |
| Sep 21, 2026 | $169 | $0 | store check |
| Sep 28, 2026 | $169 | $0 | store check |
| Oct 5, 2026 | $169 | $0 | store check |
| Oct 12, 2026 | $169 | $0 | store check |
| Oct 19, 2026 | $179 | +$10 | store check |
| Oct 26, 2026 | $179 | +$10 | store check |
| Nov 2, 2026 | $259.99 | +$91 | store check |
| Nov 9, 2026 | $259.99 | +$91 | store check |
| Nov 16, 2026 | $259.99 | +$91 | store check |
Known issues 4
Report an issueFrom brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.
-
Medium Nozzle heating failure and abnormal temperature errors
Neptune 3 Pro owners hit nozzle heating failures and overheat or underheat errors, including negative temperature readings and prints aborting midway. Elegoo has an official wiki page for these errors, and Printer Hub, citing it, names the toolhead ribbon cable as the most common cause, ahead of the thermistor and the mainboard.
What fixes it: With the printer on, slowly push the toolhead along X by hand; if the temperature jumps, replace the ribbon cable. Also inspect the adapter board pins and the thermistor lead, and follow Elegoo's wiki steps before replacing the board.
From public reports: wiki.elegoo.com, printer-hub.com · Confirm or add a fix
-
Medium Nozzle scrapes bed after firmware update (Z zero lost)
After updating to the 1.x.5.1b mainboard firmware, Neptune 3 series owners report the Z zero shifting so the nozzle scrapes a bed that was level before. About eight or nine owners across the Neptune 3, 3 Pro, 3 Plus and 3 Max joined the main GitHub thread in late 2023, and Elegoo support's answer to the original poster was that the mainboard was faulty. Printer Hub attributes it to a changed settings layout that misreads old EEPROM values. No official firmware fix was posted.
What fixes it: Reset settings to defaults after updating (M502 then M500), then redo bed leveling and Z offset. One owner fixed it by heating the bed before homing in the start G-code. The original poster said rolling back firmware did not help.
From public reports: github.com, printer-hub.com · Confirm or add a fix
-
Low Filament runout sensor disabled on firmware 1.1.5.1b/1.1.5.1c
On the Neptune 3 Pro, the filament runout sensor stopped pausing prints after upgrading from 1.1.5.1a to 1.1.5.1b or 1.1.5.1c; the setting disappears from EEPROM. Another owner confirmed the same behavior and that only rolling back restored it.
What fixes it: Roll back to 1.1.5.1a with screen firmware 1.4.1, which restored the sensor for both owners. A community member suggested rebuilding firmware from source with the sensor re-enabled, but did not confirm it works.
From public reports: github.com, printer-hub.com · Confirm or add a fix
-
Medium Random reboots that wipe Z offset and mesh
Several owners report the Neptune 3 Pro or Plus rebooting while using the menus quickly or starting a print, and a reboot can clear the stored Z offset and bed mesh. One thread ties it to the 1.x.5.1b firmware. Elegoo support told one owner the mainboard was at fault. A separate owner traced random shutdowns on his board to an overheating 3.3 V regulator.
What fixes it: One owner downgraded to 1.x.5.1a with screen firmware 1.4.1 and the reboots stopped. For heat-related shutdowns, one owner added a copper heatsink to the board's 3.3 V regulator. Elegoo support has offered to sell a replacement mainboard, though owners doubt it fixes the cause.
From public reports: github.com, github.com, github.com · Confirm or add a fix
Specs
An older Marlin-based bed slinger with a direct drive extruder, dual Z lead screws and 36-point auto leveling. It suits beginners who want a quiet, simple printer, though the Neptune 4 series is faster for similar money.
Consider instead
Needs owners1 of 5 so far
8.52 press
Needs owners2 of 5 so far
No press
Needs owners1 of 5 so far
9.02 press
What the press said · 9.0 from 2 press outlets · Read them
What reviewers say 9.0 from 2
How scores work-
9.0 Windows CentralOne of the easiest 3D printer recommendations to make thanks to a capable hotend and friendly interface.
One of the easiest 3D printer recommendations to make thanks to a capable hotend and friendly interface.
- Capable direct drive hotend
- Textured PEI sheet included
- Easy touchscreen UI
- PSU fan always runs
- Finicky runout sensor
- Bulky touchscreen unit
Read the full review on Windows Central · by Domenico Lamberti
-
9.0 Tom's HardwareAn easy to use budget printer that adds direct drive and dual Z axes without raising the price.
An easy to use budget printer that adds direct drive and dual Z axes without raising the price.
- Easy assembly
- Simple auto bed leveling
- Quiet operation
- Hard to upgrade
Read the full review on Tom's Hardware · by Denise Bertacchi