Skip to content

QIDI Q2

Not enough owners for a score yet. Here's what they say so far. Good time to buy.

QIDI Q2

2 of 5 owners · 3 more and the score goes live.

Own one? Tap your score:
$449 was $499
10% offLowest in 90 days
Buy at QIDI

Paid link. We may earn a commission at no extra cost to you. How this works

Price checked Nov 7 on the official US store.

Owner reviews 2 Rate it (10 seconds)

Reviewers earn Spools (site points) for any review, good or bad. Spools never change a score.

Not enough owner reviews for an overall owner rating yet: 2 of 5. Every rating is shown below as it comes in. Own one? Add yours.

J
JB3DEarned Spools November 11, 2026
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ 8
Recommends this

Hard working printer

What I liked:

Eas of setup Prints PLA PETG and Engineered filaments with quality. Just does its job very well

What I didn't like:

Qidi box issues Some updates leave you wondering why

View In-Depth Breakdown

Comments (0)

O
owner-31969Earned Spools November 9, 2026 (Edited)
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ 8
Recommends this

8/10 and would buy again

Owned 6 to 12 months

What I liked:

Like the quality of the print, way better quality then my Flashforge creator 5 pro.

What I didn't like:

My bed mesh keeps getting off. Every couple month have to redo the bed mesh on it.

Comments (0)

Owner wall

Own one? Add yours

No verified owners yet. Post a photo of yours with your code and be the first on the wall.

Price history

Official US store, checked weekly

Good time to buy. Now $449. At or near the lowest price we have tracked. Tracked since Jan 2026.

$449 now, $50 below the median ($499)
+$50−$50 $499 DecJan 26FebMarAprMayJunJulAugSepOctNov +$50−$50 $499 Jan 26MarMayJulSepNov
Each week's price against the median price, lightly smoothed. Median $499, lowest $449 (week of Nov 16), highest $499, now $449 (−$50 vs median).
Weekly price
Week ofLowest pricevs medianSource
Nov 17, 2025$499$0store check
Nov 24, 2025$499$0store check
Dec 1, 2025$499$0store check
Dec 8, 2025$499$0store check
Dec 15, 2025$499$0store check
Dec 22, 2025$499$0store check
Dec 29, 2025$499$0store check
Jan 5, 2026$499$0store check
Jan 12, 2026$499$0store check
Jan 19, 2026$499$0store check
Jan 26, 2026$499$0store check
Feb 2, 2026$499$0store check
Feb 9, 2026$499$0store check
Feb 16, 2026$499$0store check
Feb 23, 2026$499$0store check
Mar 2, 2026$499$0store check
Mar 9, 2026$499$0store check
Mar 16, 2026$499$0store check
Mar 23, 2026$499$0store check
Mar 30, 2026$499$0store check
Apr 6, 2026$499$0store check
Apr 13, 2026$499$0store check
Apr 20, 2026$499$0store check
Apr 27, 2026$499$0store check
May 4, 2026$499$0store check
May 11, 2026$499$0store check
May 18, 2026$499$0store check
May 25, 2026$499$0store check
Jun 1, 2026$499$0store check
Jun 8, 2026$499$0store check
Jun 15, 2026$499$0store check
Jun 22, 2026$499$0store check
Jun 29, 2026$499$0store check
Jul 6, 2026$499$0store check
Jul 13, 2026$499$0store check
Jul 20, 2026$499$0store check
Jul 27, 2026$499$0store check
Aug 3, 2026$499$0store check
Aug 10, 2026$499$0store check
Aug 17, 2026$499$0store check
Aug 24, 2026$499$0store check
Aug 31, 2026$499$0store check
Sep 7, 2026$499$0store check
Sep 14, 2026$499$0store check
Sep 21, 2026$499$0store check
Sep 28, 2026$499$0store check
Oct 5, 2026$499$0store check
Oct 12, 2026$499$0store check
Oct 19, 2026$499$0store check
Oct 26, 2026$499$0store check
Nov 2, 2026$449−$50store check
Nov 9, 2026$449−$50store check
Nov 16, 2026$449−$50store check

Known issues 5, 1 serious

Report an issue

From brand advisories, owner forums and reviews, with sources on each. Newest first. Tap one for what happens and what fixes it.

  • High QIDI Box multicolor feeding is unreliable on the Q2 Last reported Oct 2026

    The filament path from the QIDI Box into the Q2 has a tight hub and a sharp PTFE bend into the extruder, which causes binding and jams. Tom's Hardware could only feed one color reliably, and a second Box sent by QIDI behaved the same. Version 2 of the Box added new entry guides, a buffer and a tube support, but the inlet is still criticized.

    What fixes it: Install QIDI's riser (now in the Box accessory kit) to reduce the bend and check PTFE tubes for wear and kinks, though Tom's Hardware found the riser alone did not make multicolor work. If multicolor matters, weigh this before buying the combo.

    From public reports: tomshardware.com, 3dwork.io, deskmodder.de, 3d.nice-cdn.com · Confirm or add a fix

  • Medium PLA jams when the lid is closed and the chamber is warm Last reported Oct 2026

    With the top cover closed, heat builds up and PLA can soften before it reaches the melt zone, causing clicking, under-extrusion, or a full jam. 3Dwork hit a few jams in its first week; the fix was in QIDI's wiki but not prominent in the quick start guide.

    What fixes it: Slide the top cover open for PLA and similar filaments, and turn chamber heating off in the profile for PLA and PETG.

    From public reports: 3dwork.io, printer-hub.com · Confirm or add a fix

  • Low Noisy fans and Box loading Last reported Oct 2026

    Reviewers call the Q2 loud, around 50 to 60 dB while printing, with extra clatter from the QIDI Box and the filament cutter during swaps.

    From public reports: tomshardware.com, 3dwork.io · Confirm or add a fix

  • Low App and slicer sync problems Last reported Oct 2026

    QIDI Studio blocks sending a job when the filament set on the printer screen does not match the slicer, even when settings were entered correctly. One reviewer (3DWork) also reports frequent QIDI Link app connection failures and occasional QIDI Cloud drops.

    What fixes it: Match filament entries on screen and in QIDI Studio before sending, or control the printer through Fluidd on the local network.

    From public reports: tomshardware.com, 3dwork.io · Confirm or add a fix

  • Low Firmware updates need a network connection Last reported Dec 2025

    Q2 firmware is delivered over Wi-Fi or Ethernet and was not offered as a manual download, which is a problem for owners who keep the printer offline. One owner had to get a separate download link from after-sales support.

    What fixes it: Ask QIDI support for the offline package and install it from USB in a QD_Update folder.

    From public reports: codelv.com, deskmodder.de · Confirm or add a fix

Specs

The QIDI Q2 is a compact enclosed CoreXY printer with a 270 × 270 × 256 mm build volume. It pairs a 370 °C hotend with an actively heated chamber up to 65 °C, so it can handle engineering materials, and it can be bought as a combo with the QIDI Box for multi-color printing. Aimed at first-time and budget buyers.

270 × 270 × 256 mmbuild volume
CoreXY, enclosedformat
370 °Cmax nozzle
120 °Cmax bed
65 °C (active heating)chamber
600 mm/smax speed
1 (multicolor with QIDI Box combo)toolheads
QIDI Boxmulticolor add-on
Q1 Pro Q2replaces
August 2025released

Consider instead

What the press said · 7.5 from 2 press outlets · Read them

What reviewers say 7.5 from 2

How scores work
  • 9.0 TechRadarAfter six months of use the reviewer found it a refined, no-fuss enclosed printer with standout reliability, though … 4.5/5 · Sep 2026

    After six months of use the reviewer found it a refined, no-fuss enclosed printer with standout reliability, though the optional QIDI Box was less impressive.

    • Excellent reliability
    • Wide material support
    • Simple auto calibration
    • Smaller build volume than the Max4
    • Not the fastest
    • QIDI Box costs extra

    Read the full review on TechRadar · by Alastair Jennings

  • 6.0 Tom's HardwareA strong printer that excels with high-temperature filaments, but the bundled QIDI Box failed repeatedly, so the reviewer … 3/5 · Nov 2025

    A strong printer that excels with high-temperature filaments, but the bundled QIDI Box failed repeatedly, so the reviewer suggests skipping the combo.

    • Heated chamber with filtration
    • Hardened nozzle
    • Box doubles as a filament dryer
    • QIDI Box unreliable
    • Tight PTFE bend needs a riser
    • Screen interferes with the door

    Read the full review on Tom's Hardware · by Denise Bertacchi

KeoPrints review

Not counted in the Internet score

Keo's take

Keo stresses this is a first-impressions look at a pre-production unit, not a full review, but says his first impressions are excellent and about 100 hours of printing have gone well. He says both the Q2 and the QIDI Box multicolor unit show a lot of promise.

Pros, cons and the video
  • QIDI Box can dry filament while printing and handles abrasive filaments
  • 370 C hotend, 120 C bed and a dedicated chamber heater
  • A full plate of tiny multicolor test prints came out with zero failures
  • QIDI Box is not officially cardboard spool compatible
  • Filament can only be unloaded through the screen
  • Another reskinned slicer, with default purge settings that caused color bleed

Aug 21, 2025 · Printer provided by QIDI